0
0

RCBS Pro Chucker 5 Shell Plate #14 – .45-70, .338 Lapua, Weatherby

UPC: 076683889287

$62.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The #14 is the shell plate you reach for when you're running the big stuff on your Pro Chucker 5 progressive. It's sized for large-head rimmed and belted magnum cases, covering a lineup that includes .45-70 U.S. Government, .30-378, .338-378, .378 and .460 Weatherby Magnum, .338 Lapua Magnum with Lapua brass, and a spread of Sharps Straight cases from .40-65 on up. Each station cradles the case and holds it square to the die so your resizing, seating and crimping stay consistent round after round.

What the Pro Chucker 5 Shell Plate #14 Does on the Press

On a progressive, the shell plate is the heart of the operation. It indexes your brass through all five stations and keeps everything aligned, which is what lets you pull the handle and get a finished round each cycle. Because it's a bolt-in component, swapping to the #14 when you move to a different case head is quick, and you get to leave your dies set up right where you dialed them. That's the real appeal of a progressive setup, and the correct plate is what makes it work.

Matching Brass to the #14 Shell Plate

This is a caliber-specific part, so getting the number right matters. The #14 is built around that family of large magnum and heavy Sharps case heads, and a quick check against RCBS's shell holder chart will confirm it's the one for your cartridge before you load. Worth knowing: .338 Lapua loaders should run Lapua-headstamp brass with the #14, since other brands of brass in that chambering sometimes call for a different plate. If you're loading Norma-based cases, verify the chart rather than assuming.

Built to RCBS Standards

RCBS machines these to tight tolerances for a clean fit and dependable indexing, and they back the Pro Chucker 5 Shell Plate #14 with their limited lifetime warranty. It's made in the USA and designed specifically for the Pro Chucker 5. If you're running a Pro Chucker 7, you'll need the Pro Chucker 5 to 7 conversion kit, sold separately, to use these plates.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 88928
  • UPC: 076683889287
  • Shell Plate Size: #14
  • Stations: 5
  • Compatible Press: RCBS Pro Chucker 5 (Pro Chucker 7 with conversion kit)
  • Caliber Coverage: .45-70 Gov, .30-378/.338-378/.378/.460 Weatherby Mag, .338 Lapua (Lapua brass), .40-65 Shiloh-Sharps, .45-90/.45-100/.45-110 Sharps Straight
  • Color: Black
  • Quantity: 1
  • Country of Origin: USA
  • Warranty: Limited Lifetime
  • Shipping Weight: 0.475 lb

What’s Included

  • One RCBS Pro Chucker 5 Shell Plate, Size #14

Frequently Asked Questions

Which calibers does the Pro Chucker 5 Shell Plate #14 fit?

The #14 covers large rimmed and belted magnum cases including .45-70 U.S. Government, .30-378, .338-378, .378 and .460 Weatherby Magnum, and .338 Lapua Magnum with Lapua brass. It also handles several Sharps Straight cases from .40-65 up through the .45-110 range. Always cross-check RCBS's shell holder chart against your exact cartridge before loading.

Will this shell plate work on a Pro Chucker 7?

Not on its own. These plates are designed for the Pro Chucker 5. To run a Pro Chucker 5 plate on a Pro Chucker 7, you'll need the Pro Chucker 5 to 7 conversion kit, which RCBS sells separately.

Can I use the #14 for .338 Lapua?

Yes, but with a catch on brass. The #14 is listed for .338 Lapua when you're using Lapua-headstamp brass. Some other brass makes in that chambering can call for a different plate, so verify against the chart if you're not running Lapua cases.

Why would I need more than one shell plate for my press?

The shell plate is caliber-specific, so each case head family needs its matching plate. Keeping the right plates on hand lets you change calibers fast while leaving your dies set, which is the whole point of running a progressive. It keeps your cases aligned with the dies for consistent sizing, seating and crimping.

Additional information

UPC

076683889287

Manufacturer

Manufacturer Part Number

88928

Shipping Weight

0.475

Reviews

There are no reviews yet.

Be the first to review “RCBS Pro Chucker 5 Shell Plate #14 – .45-70, .338 Lapua, Weatherby”