Description
If you're running an RCBS Pro Chucker 5 progressive press, the shell plate is the heart of how your cases line up with each die on every pull of the handle. The #10 plate is cut for the same case heads as the familiar RCBS #10 shell holder, which covers some of the most popular rounds on any reloading bench.
This one handles a solid lineup of small-rim cases, including .223 Remington (5.56mm), .300 AAC Blackout, .222 Remington, .204 Ruger, .17 Remington, and .380 ACP, among others. If you'd reach for a #10 shell holder on a single-stage press for a given cartridge, the #10 Pro Chucker plate is the matching piece for your progressive setup.
What the Pro Chucker 5 Shell Plate #10 Does on Your Press
The shell plate is what captures and carries your brass through each station, keeping the case aligned with the die as the press auto-indexes. It's machined from durable steel to tight tolerances, so cases sit square and feed smoothly stroke after stroke. A good plate means less fiddling and more consistent rounds coming off the press, which is really the whole point of going progressive.
Caliber Swaps and Pro Chucker 7 Compatibility
The beauty of a shell plate system is quick caliber changes. Keep a plate on hand for each case family you load and you can switch cartridges without breaking down your die setup every session. Worth knowing: this is a Pro Chucker 5 plate. If you're running a Pro Chucker 7, you'll need the Pro Chucker 5-to-7 Conversion Kit installed to use it, since the two presses index differently.
Built to Outlast the Brass You Run Through It
RCBS backs this plate with their limited lifetime warranty, and it's made right here in the USA. That's the kind of reassurance that matters on a part doing real mechanical work thousands of rounds at a time. Match the plate number to your cartridge, drop it in, and get back to loading.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 88924
- UPC: 076683889249
- Shell Plate Size: #10
- Fits: RCBS Pro Chucker 5 (and Pro Chucker 7 with 5-to-7 Conversion Kit)
- Primary Calibers: .223 Remington, .300 AAC Blackout, .222 Remington, .204 Ruger, .17 Remington, .380 ACP
- Material: Steel
- Quantity: 1 shell plate
- Warranty: Limited Lifetime
- Country of Origin: USA
- Shipping Weight: 0.505 lb
What’s Included
- One (1) RCBS Pro Chucker 5 Shell Plate #10
Frequently Asked Questions
Which calibers does the Pro Chucker 5 Shell Plate #10 fit?
The #10 plate matches the same case heads as the RCBS #10 shell holder. That covers .223 Remington (5.56mm), .300 AAC Blackout, .222 Remington, .204 Ruger, .17 Remington, and .380 ACP, among other small-rim cases. If a cartridge calls for a #10 shell holder, this is the plate you want.
Will this shell plate work on my Pro Chucker 7 press?
It's designed for the Pro Chucker 5. You can run Pro Chucker 5 plates on a Pro Chucker 7, but only after installing the RCBS Pro Chucker 5-to-7 Conversion Kit, which is sold separately. Without that kit, stick with Pro Chucker 7 plates on a 7-station press.
Do I still need a separate shell holder if I have this plate?
On the Pro Chucker progressive press, the shell plate takes the place of the single-stage shell holder. The numbering system lines up, so a #10 plate works for the same cartridges a #10 shell holder would. You don't need a separate shell holder for loading on the press itself.
Is the Pro Chucker 5 Shell Plate #10 covered by a warranty?
Yes. RCBS backs it with their limited lifetime warranty, and it's made in the USA. Since it's a precision steel part doing continuous mechanical work, that coverage is good peace of mind.




Reviews
There are no reviews yet.