Description
If you've been chasing tighter groups and cleaner velocity numbers, the inside of your flash hole is one of those small details that quietly matters. When brass is made, the flash hole gets punched out, and that process often leaves a little burr on the inside wall. That burr can throw off how evenly your primer lights the powder charge, and the RCBS Flash Hole Deburring Tool is built to shave it away cleanly on .22 caliber cases.
This is the .22 version (MPN 88145), sized for the .224 family of cartridges like .223 Remington, .222, .22-250, and .220 Swift. The tool automatically locates the flash hole and trims the burr in a few seconds per case. The steel cutter does the work while a self-centering pilot collar keeps everything lined up straight, so you get a nice concentric cut every time.
Why the RCBS Deburring Tool Earns a Spot on Your Bench
The real trick here is the adjustable stop paired with the Case Pilot Stop. The collar is held in place on the shaft with a grub screw, so you can set your depth once and run through a batch of brass knowing the cutter is only taking off the burr and not enlarging the flash hole or chewing into good brass. The Case Pilot Stop holds the case steady and keeps it from wobbling while you turn the handle, which makes for a cleaner, more repeatable cut.
Set It Once and Forget It
One of the nicest things about flash hole deburring is that it's a one-time job. Do it once per piece of brass and you're set for the life of that case. For the best results, keep your brass trimmed to a consistent length before you deburr so the stop indexes the same way on every case. With a plastic handle and a one-piece steel shaft and cutter, this is a simple hand tool that does exactly what it says, and it's made in the USA and backed by RCBS's limited lifetime warranty.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 88145
- UPC: 076683881458
- Caliber: .22 Caliber (.224 diameter)
- Function: Flash hole deburring
- Cutter Material: Steel
- Handle Material: Plastic
- Pilot Collar: Self-centering with adjustable stop
- Includes: Case Pilot Stop
- Country of Origin: Made in the USA
- Warranty: RCBS Limited Lifetime Warranty
What’s Included
- RCBS Flash Hole Deburring Tool (.22 Caliber)
- Self-centering pilot collar with adjustable stop
- Case Pilot Stop
Frequently Asked Questions
What cartridges does the .22 caliber RCBS Flash Hole Deburring Tool work with?
This 88145 model is set up for the .224 bullet family, which covers popular rounds like .223 Remington, .222, .22-250, and .220 Swift. The pilot collar fits into the neck of those cases for a concentric cut. If you reload other calibers, RCBS offers the same tool in 6mm, 7mm, and .30 caliber sizes.
Do I have to deburr the flash hole on every reload?
No, this is a one-and-done job. You only need to deburr the inside of the flash hole once in the life of a piece of brass. After that first pass, that case is good to go for the rest of its reloading life.
Will the tool make the flash hole bigger?
No. The self-centering pilot collar and adjustable stop are designed to remove just the burr without enlarging the flash hole diameter or cutting away good brass. Setting the stop correctly keeps the cut consistent from case to case.
Does it matter if my brass is different lengths?
Yes, it helps a lot to have your brass trimmed to a uniform length before deburring. Since the stop indexes off the case, consistent length means the cutter reaches the flash hole the same way on every case. Trim first, then deburr, and you'll get the most repeatable results.




Reviews
There are no reviews yet.