Description
Anybody who has spent an afternoon rolling cases across a lube pad knows how slow and sticky that chore gets. The RCBS Lube Die #1 solves that by combining two steps into one. As the case travels up into the die, it gets decapped and lubricated at the same time, so you spend less time handling brass and more time loading it. It threads into any press with the industry-standard 7/8-14 mount, which means it drops right into whatever setup you already run.
What the Lube Die #1 Covers
This is the Size #1 die, built for the smaller bottleneck family. It handles .17 Remington, .218 Bee, .221 Fireball, .222 Remington, .222 Remington Magnum, and .223 Remington. If you load a lot of these little rounds, this is the die that fits them. RCBS splits the lineup into four sizes across 45 popular calibers, so matching the die to your brass matters here. Confirm your cartridge falls in the #1 group before setting it up on the bench.
Why Reloaders Keep the Lube Die #1 on the Press
It really shines when you are running a progressive press. It was designed with machines like the Pro 2000, Piggyback II, AmmoMaster, and Auto 4×4 in mind, letting it decap and lube in one station while sizing and priming happen down the line. Reloaders who full-length size hundreds of bottleneck cases in a sitting tend to love how much time it saves over hand-lubing each one. It also works just fine on a single-stage press if that is how you roll, though the time savings are most noticeable on a progressive.
Refilling and Setup
The reservoir is easy to top off and uses RCBS Case Lube-2, which comes with the die. One thing worth knowing: the die ships dry, so you will want to charge it with lube and let it sit per the instructions before your first run. Do that and it delivers a consistent, cleaner coat of lube pull after pull.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 87551
- Model Number: 87551
- UPC: 076683875518
- Type: Lube Die with decapping unit
- Die Size: #1
- Calibers Covered: .17 Rem, .218 Bee, .221 Fireball, .222 Rem, .222 Rem Mag, .223 Rem
- Thread Size: 7/8-14
- Press Compatibility: Progressive and single-stage presses
- Lube Used: RCBS Case Lube-2 (included)
- Shipping Weight: 0.8125 lbs
What’s Included
- RCBS Lube Die #1 (87551) with decapping unit
- RCBS Case Lube-2
Frequently Asked Questions
Which calibers does the RCBS Lube Die #1 work with?
The Size #1 die is built for the smaller bottleneck cartridges, including .17 Remington, .218 Bee, .221 Fireball, .222 Remington, .222 Remington Magnum, and .223 Remington. RCBS offers the Lube Die in four sizes that cover 45 calibers total, so if you shoot something outside this group you will want a different size. Always match the die number to your brass before setting it up.
Can I use the Lube Die #1 on a single-stage press?
Yes. While it was designed with progressive presses like the Pro 2000, Piggyback II, AmmoMaster, and Auto 4×4 in mind, it works fine on a single-stage press too. It uses a standard 7/8-14 thread, so it mounts in just about any press. The biggest time savings show up on progressive setups, but it still beats a lube pad on a single-stage.
Does the RCBS Lube Die #1 come with lube?
It does. The die ships with RCBS Case Lube-2, and the reservoir is easy to refill when you run low. Keep in mind the die arrives dry, so you will want to charge it with lube and let it sit per the instructions before your first batch of brass.
How is this better than a traditional lube pad?
The main advantage is speed and cleanliness. Instead of rolling each case across a pad and then sizing it, the die decaps and lubes in a single stroke, cutting out a whole step. That makes a real difference when you are prepping hundreds of cases in one sitting.




Reviews
There are no reviews yet.