Description
The RCBS Little Dandy Powder Rotor #17 is a replacement rotor for the RCBS Little Dandy Powder Measure, built to throw a fixed powder charge by volume. It's part of the full lineup of interchangeable rotors that cover pistol and select small-caliber rifle loads, so you grab the number that matches the charge weight you need and get consistent drops every time. The #17 sits in the upper-middle of the range and is a popular pick for loads that call for charges in that neighborhood, which makes it handy for things like .357 Magnum and similar recipes depending on your powder.
Why the Little Dandy #17 Earns Bench Space
Each rotor is machined from steel to deliver a repeatable volumetric charge, and the whole appeal of the Little Dandy system is that once a rotor is seated, there's no readjustment to fuss with. Swap rotors, drop your charges, and the setting can't drift on you between sessions. Reloaders who run these day in and day out tend to see drops that hold tight, with any variation landing right in the tenth-of-a-grain range that RCBS designs for. It's volume-based metering, so the actual grain weight shifts a bit with the bulk density of whatever powder you're running.
Getting the Most From Your Little Dandy Rotor #17
Smart practice with any Little Dandy rotor is to verify the charge against a reliable scale before you start a loading session. Grab the RCBS rotor charge table to see what the #17 throws with your specific powder, then confirm it on your scale and you're off to the races. Folks loading common handgun rounds like .38 Special, .357 Magnum, 9mm, .45 ACP and the like lean on this measure because the setting stays locked and it's quick to run by hand or mounted on a press. If you're stacking up volume for range days and practice ammo, this rotor keeps the charging step simple and dependable.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 86017
- UPC: 076683860170
- Rotor Size: #17
- Compatibility: RCBS Little Dandy Powder Measure
- Material: Machined Steel
- Metering Type: Fixed-charge, volumetric
- Intended Use: Pistol and select small-caliber rifle loads
- Quantity: 1 rotor
- Shipping Weight: 0.2875 lb
- Country of Origin: United States
What’s Included
- RCBS Little Dandy Powder Rotor #17 (one rotor)
Frequently Asked Questions
What does the Little Dandy Powder Rotor #17 fit?
The #17 rotor is made to drop into the RCBS Little Dandy Powder Measure. It's one of the interchangeable rotors in the Little Dandy lineup, so you can swap it in and out with other sizes depending on the charge you need. It will not work in other brands of powder measures.
How much powder does the #17 rotor throw?
Because the Little Dandy meters by volume rather than weight, the grain charge depends on the powder you're using and its bulk density. The #17 lands in the upper-middle of the rotor range and suits loads in that neighborhood. Check the RCBS rotor charge table for your powder, then confirm the actual drop on a scale before you load.
Do I need to readjust the Little Dandy rotor each time?
No, and that's the big draw of this system. Once a rotor is seated in the measure, the charge is fixed and can't drift out of adjustment between sessions. You just verify the weight on a scale when you start, then run your charges.
Is the #17 rotor good for rifle reloading?
It's built for pistol and select small-caliber rifle loads, so it shines with handgun rounds and smaller rifle cartridges that fall in its charge range. For precision long-range rifle work where you want to trickle to an exact weight, a trickler and scale setup is the better route. For range and practice volume, the Little Dandy keeps things fast and repeatable.



Reviews
There are no reviews yet.