0
0

RCBS Cowboy Bullet Mould 25-85-CM Double Cavity .258″ 85 gr Flat Nose

UPC: 076683823014

$181.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're casting your own bullets for a classic .25 caliber cartridge like the 25-20 Winchester, the RCBS Cowboy Bullet Mould in 25-85-CM is a tried and proven choice. This double-cavity mould drops an 85-grain flat nose bullet at a nominal .258" diameter, the exact profile that works so well in old lever guns and single shots. The flat nose design fits tube magazines safely and has a reputation for easy accuracy in the little .25-20, which is one of the most enjoyable cast bullet cartridges out there.

What Makes the RCBS 25-85-CM Mould Tick

RCBS machines these moulds from solid cast iron blocks held to tight tolerances. The blocks are precision ground square before machining, and steel alignment pins keep the halves mating perfectly even after years of heavy use. That matters when you're casting in volume, because consistent block alignment is what keeps your bullets round and your weights steady from the first pour to the thousandth.

Sprue Plate and Build Details of the Cowboy Mould

Up top you get a 3/16-inch solid steel sprue plate held down by tempered steel spring washers and screws, so it opens cleanly and stays put through a long casting session. The approximate finished bullet runs about 0.67" long with a 0.23" nose and a 0.20" meplat, making it a true flat point rather than a rounded profile. If you're setting up to size and lube, this mould matches RCBS Top Punch #630. The three-digit number in the mould description is always the top punch to reference.

Loading the 85-Grain .258 Cast Bullet

This bullet is a favorite among 25-20 handloaders, and it shows up in the Lyman Cast Bullet Handbook with published data. Many folks run it as a plain-base bullet at mild velocities for plinking and small game, which keeps leading down and stretches your lead supply. Keep in mind the handles are not included and are sold separately, so you'll want a set of RCBS mould handles to go with it if you don't already have a pair.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 82301
  • UPC: 076683823014
  • Model: 25-85-CM
  • Cavities: Double Cavity (2)
  • Bullet Diameter: .258"
  • Bullet Weight: 85 grain
  • Bullet Style: Flat Nose (Cowboy Action)
  • Caliber: 25 Caliber
  • Block Material: Solid Cast Iron
  • Sprue Plate: 3/16" Solid Steel
  • Top Punch: RCBS #630
  • Approx. Bullet Length: 0.67"
  • Approx. Meplat: 0.20"
  • Shipping Weight: 0.9875 lb

What’s Included

  • RCBS Cowboy Bullet Mould 25-85-CM double cavity mould block
  • Solid steel sprue plate with tempered steel spring washers and screws

Frequently Asked Questions

Do the handles come with the RCBS Cowboy Bullet Mould?

No, the handles are not included with this mould and are sold separately. You'll want a set of RCBS mould handles to operate the blocks safely during casting. If you already cast with other RCBS double cavity moulds, your existing handles will work here.

What cartridge is this 85-grain .258 bullet best suited for?

This is the classic cast bullet for the 25-20 Winchester, which uses a .258" diameter bullet. The 85-grain flat nose weight is the traditional choice for that cartridge and shows up in published Lyman cast bullet data. It's a favorite for small game and plinking loads in old lever guns and single shots.

Which top punch do I need for sizing bullets from the 25-85-CM mould?

This mould matches RCBS Top Punch #630. RCBS uses a simple rule where the three-digit number in the mould description is the top punch number to reference. That makes it easy to pair the right punch with your Lube-A-Matic sizer.

How is the RCBS Cowboy Bullet Mould built for consistency?

The blocks are machined from solid cast iron and precision ground square before machining. Steel alignment pins keep the two halves mating perfectly even after years of heavy casting, which helps keep your bullets round and your weights consistent. A 3/16-inch solid steel sprue plate held by tempered steel spring washers rounds out the build.

Additional information

UPC

076683823014

Manufacturer

Manufacturer Part Number

82301

Shipping Weight

0.9875

Reviews

There are no reviews yet.

Be the first to review “RCBS Cowboy Bullet Mould 25-85-CM Double Cavity .258″ 85 gr Flat Nose”