0
0

RCBS .310 Cadet 120 gr Round Nose Double Cavity Bullet Mould

UPC: 076683820235

$181.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Finding components for the .310 Cadet is a real headache, which is exactly why this mould earns its keep. The RCBS 82023 is a double-cavity bullet mould that drops 120-grain round nose bullets at .310 diameter, the classic profile built for the little Martini Cadet training rifles. Instead of hunting down scarce factory loads, you melt your own alloy and turn out two bullets per pour.

The .310 Cadet, also called the .310 Greener or .310 Martini, was developed in the late 1800s for Martini Cadet rifles issued to Australian military cadets, and it originally ran a heeled lead bullet in the 120-grain range at around 1,200 feet per second. That mild, accurate load is what made it a favorite for target work and small game, and it is what this mould is set up to recreate. Reloading this old cartridge takes some care with bullet fit, so most folks slug their bore first and cast accordingly to get the fit their rifle wants.

What Sets the RCBS 310-120-RN Mould Apart

These blocks are machined from solid cast iron to tight tolerances, then precision ground square before final machining. Steel alignment pins keep the halves mating cleanly even after years of heavy casting sessions, so your bullets stay consistent instead of drifting out of round over time. A 3/16-inch solid steel sprue plate is held down with tempered steel spring washers and screws, giving you a firm, clean cut on every pour.

Getting Started With the RCBS Double Cavity Bullet Mould

One thing worth knowing up front: handles are not included and are sold separately, so pair this with a set of RCBS mould handles if you do not already have a pair. Beyond that, it is straightforward to run. Keep your mould up to temperature, pour good alloy, and this thing will crank out usable 120-grain round noses batch after batch. For anyone keeping a vintage .310 Cadet fed, a dedicated mould like this is about the most reliable long-term answer there is.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 82023
  • Mould Designation: 310-120-RN
  • UPC: 076683820235
  • Caliber / Cartridge: .310 Cadet (310 Greener / 310 Martini)
  • Bullet Diameter: 0.310 in
  • Bullet Weight: 120 grain
  • Bullet Profile: Round Nose
  • Cavity Count: 2 (Double Cavity)
  • Block Material: Solid cast iron
  • Sprue Plate: 3/16-inch solid steel
  • Handles: Not included, sold separately
  • Shipping Weight: 1.0 lb

What’s Included

  • RCBS 310-120-RN double cavity bullet mould block
  • 3/16-inch steel sprue plate with tempered steel spring washers and screws

Frequently Asked Questions

What cartridge is the RCBS .310 Cadet mould made for?

It is designed for the .310 Cadet, also known as the .310 Greener or .310 Martini, which was built for the Martini Cadet single-shot training rifles. The mould drops a 120-grain round nose bullet at .310 diameter, matching the classic profile for that cartridge. Since factory ammo and components are tough to find, casting your own is one of the better ways to keep one of these rifles running.

Does the RCBS 310-120-RN mould come with handles?

No, handles are not included with this mould and are sold separately. You will want a set of RCBS mould handles to run it. If you already cast with RCBS blocks, your existing handles should work fine.

How many bullets does this double cavity mould cast per pour?

Two at a time. The double cavity design lets you drop a pair of 120-grain round nose bullets with each pour, which speeds up a casting session considerably over a single cavity block. Keep the mould at a steady temperature and the castings stay clean and consistent.

What is the RCBS bullet mould built from?

The blocks are machined from solid cast iron to tight tolerances and precision ground square before final machining. Steel alignment pins keep the halves lined up over years of use, and a 3/16-inch solid steel sprue plate held by tempered steel spring washers and screws gives a clean cut every time. It is a durable setup made to last through a lot of casting.

Additional information

UPC

076683820235

Manufacturer

Manufacturer Part Number

82023

Shipping Weight

1.0

Reviews

There are no reviews yet.

Be the first to review “RCBS .310 Cadet 120 gr Round Nose Double Cavity Bullet Mould”