Description
Serious handloaders know that neck tension is one of the quiet details that separates good groups from great ones, and this RCBS .332 steel neck bushing is how you fine-tune it. It drops right into your RCBS Gold Medal Match bushing die and lets you set the exact amount of grip on the bullet instead of leaving it to chance. The bushing is machined from steel and self-centers as the case neck passes through, so sizing stays even all the way around.
Why the .332 Bushing Earns Its Keep
Running a correctly sized bushing means you only work the brass as much as you need to. That cuts down on the work hardening that cracks necks and shortens case life, and it keeps your neck dimensions consistent round after round. That kind of repeatability is exactly what benchrest and long range precision folks have chased with bushing dies for years, and it pays off anytime you're loading for accuracy.
Picking the Right Bushing Size
If you're not sure .332 is your number, the math is simple. Measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inch to allow for brass springback, which lands you right around the correct neck tension. You can also double your neck wall thickness, add your bullet diameter, and subtract .001 inch. RCBS suggests keeping a bushing or two above and below your target size on the bench, since necks thin out over time and your ideal number can shift.
What It Works With
This bushing is made for the RCBS Gold Medal Match bushing die system and works in both the full length and neck sizing styles. It ships in the white as bare steel, so treat it like the rest of your sizing operation and use case lube for smooth, consistent results. For the cleanest sizing, pair it with quality brass that has consistent neck wall thickness, and consider neck turning if you really want to tighten up your spread.
Key Specifications
- Manufacturer: RCBS
- Bushing Diameter: 0.332 inch
- Material: Steel (bare, in-the-white)
- Type: Interchangeable Neck Sizing Bushing
- Compatibility: RCBS Gold Medal Match bushing dies
- Sizing Styles: Full length and neck sizing
- Design: Self-centering
- Manufacturer Part Number: 81647
- UPC: 076683816474
What’s Included
- One RCBS .332 steel neck die bushing
Frequently Asked Questions
What dies does the RCBS .332 neck bushing fit?
It's designed for the RCBS Gold Medal Match bushing die system and works in both full length and neck sizing styles. Redding, Wilson, and Hornady bushings also fit RCBS Gold Medal bushing dies, and in many cases RCBS bushings will cross over into those brands' dies as well. If you're running a standard RCBS die without the bushing feature, this part won't apply.
How do I know if .332 is the right bushing size for my load?
Measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 inch to allow for brass springback. You can also double your case neck wall thickness, add your bullet diameter, and subtract .001 inch. If either method lands you near .332, this is your bushing, and it's smart to keep a size above and below on hand.
Do I need to lube when using the RCBS steel neck bushing?
Yes. These bushings ship in the white as bare steel rather than coated, so case lube is part of the process for smooth, consistent sizing. A light touch of lube on the neck keeps everything moving cleanly and helps protect both your brass and the bushing.
Will this bushing actually help my brass last longer?
A properly sized bushing only works the neck as much as it needs to, which reduces the work hardening that eventually cracks necks. Less overworking means longer case life and more consistent neck tension from load to load. You'll see the biggest gains when you start with quality brass that has uniform neck wall thickness.




Reviews
There are no reviews yet.