0
0

RCBS Full Length Die Set Group G 9.3×64 Brenneke 2-Die Set

UPC: 076683564450

$95.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 9.3×64 Brenneke is one of those big European game cartridges where factory ammo can be scarce and spendy, which makes rolling your own a smart move. This RCBS Group G set gives you the two dies you need to do it right: a full-length sizer with an expander-decapping unit and a seater die with a bullet seater plug. It's the same bench-proven RCBS formula trusted on heavy-hitting rounds, just tooled specifically for the 9.3×64.

What the RCBS Group G 9.3×64 Die Set Does on the Press

The full-length sizer handles three jobs in a single pass. It sizes the outside of the case back to SAAMI minimum dimensions, knocks out the spent primer, and expands the case neck so it's ready to accept a bullet. Vent holes in the die body let trapped air and excess lube escape, which keeps you from denting or crushing brass. RCBS also holds headspace to minimum tolerances so the case body length stays consistent through full-length sizing, which matters a lot when you're feeding a bolt gun chambered for a long-action magnum like this one.

Seating and Crimping with the RCBS 9.3×64 Brenneke Set

The included seater die carries a built-in roll crimper, so it sets the bullet to depth and crimps the case mouth in the same stroke. That roll crimp is a nice touch on a hard-recoiling cartridge, since it helps hold bullets firmly in place and keeps them from creeping under recoil in the magazine.

Build and Fit

RCBS machines these from proprietary die steel, hardens them in-house, and hand inspects every set before it leaves the Oroville, California factory. They're cut with the standard 7/8"-14 thread, so they'll thread into single-stage and progressive presses from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and pretty much anyone else running that industry-standard setup. The whole thing ships in the familiar green RCBS die box and is backed by the company's limited lifetime warranty to the original owner.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: 9.3x64mm Brenneke
  • Set Type: Full-Length 2-Die Set
  • Group: G
  • Included Dies: Full-Length Sizer Die, Bullet Seater Die
  • Thread: Standard 7/8"-14
  • Material: Proprietary Die Steel
  • Crimp Type: Built-in Roll Crimper
  • Country of Origin: USA
  • Warranty: Limited Lifetime (original owner)
  • Manufacturer Part Number: 56445
  • UPC: 076683564450
  • Shipping Weight: 1.3125 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug
  • Green RCBS die storage box

Frequently Asked Questions

Will this RCBS 9.3×64 Brenneke die set fit my press?

It should fit just about any standard press. RCBS cuts these dies with the industry-standard 7/8"-14 thread, which works in single-stage and progressive presses from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and others. As long as your press takes standard threaded dies, you're good to go.

What dies come in the Group G set?

You get two dies: a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer brings brass back to SAAMI minimum dimensions, de-primes, and expands the neck in one pass, while the seater sets bullet depth and crimps. That covers the core steps for loading 9.3×64 Brenneke.

Does the seater die crimp the bullet?

Yes. The seater die has a built-in roll crimper that secures the bullet at the same time it's seated. On a hard-kicking cartridge like the 9.3×64, that roll crimp helps keep bullets from working loose under recoil.

Are RCBS dies made in the USA and warrantied?

They are. RCBS machines these dies from proprietary steel, hardens them, and hand inspects each set at their Oroville, California factory. They're also backed by a limited lifetime warranty to the original owner against defects in material or workmanship.

Additional information

UPC

076683564450

Manufacturer

Manufacturer Part Number

56445

Shipping Weight

1.3125

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length Die Set Group G 9.3×64 Brenneke 2-Die Set”