0
0

RCBS X Die Small Base Sizer Die .308 Win – 39259

UPC: 076683392596

$63.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS X Die Small Base Sizer in .308 Win is built for folks who want reliable feeding and less time at the trimmer. From the outside it looks like a standard full-length sizing die, but it brings two useful features together. The small base profile squeezes the lower body of the case down a touch more than a standard full-length die, which is exactly what you want when brass has to drop cleanly into a tight or semi-auto chamber. Inside, a specially designed mandrel with an expander ball and decapping pin resizes the neck and knocks out the spent primer in the same stroke.

How the X Die Mandrel Controls Case Growth

The real trick here is the patented X Die design. After you trim your brass once at about .020 inch off maximum case length to standardize everything, the mandrel contacts the case mouth during sizing and slows down the growth rate. Because the tolerance between the mandrel and the die neck wall is so tight, the neck wall does not thicken as the case length gets pushed back. In practice, cases run through the X Die will grow a few thousandths at first, then settle in below maximum length. That means you can stop trimming after that first pass, which is a real time saver when you are loading in volume.

Where the Small Base Sizer Earns Its Keep

A small base die shines when standard full-length sizing leaves the case body just a hair too fat to chamber easily. That shows up most with AR-10 and LR-308 platforms, M1A rifles, and tight match chambers where there is little camming power to force a round home. Running brass through this die brings the base down to minimum spec so rounds feed and extract without a fight. Keep in mind it works the brass a bit harder than a standard die, so it is the right tool when feeding reliability matters most.

This is the sizer die sold on its own, so it drops right into your existing .308 setup alongside a seater you already own. It is made in the USA and backed by RCBS, a name that has been building reloading gear for decades.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .308 Winchester
  • Die Type: Small Base Full Length Sizer
  • Configuration: Sizer die only
  • Mandrel: Expander ball with decapping pin attached
  • Material: Steel
  • Country of Origin: USA
  • Manufacturer Part Number: 39259
  • UPC: 076683392596
  • Shipping Weight: 0.75 lbs

What’s Included

  • RCBS X Die Small Base Sizer Die .308 Win
  • Mandrel with expander ball and decapping pin

Frequently Asked Questions

What makes the RCBS X Die Small Base Sizer different from a standard sizing die?

It combines two features in one die. The small base profile sizes the lower case body down more than a standard full-length die for reliable chambering, while the patented X Die mandrel contacts the case mouth during sizing to control case growth. After an initial trim of about .020 inch off maximum length, you can stop retrimming because the brass stabilizes below maximum case length.

Do I still need to trim my .308 brass with this X Die?

You trim once to standardize the brass, taking roughly .020 inch off the maximum case length before you start running it through the die. After that, the X Die mandrel slows the growth rate so cases settle in below max length. For most reloaders that means you skip the repeated trimming that normally comes with bottleneck rifle cases.

Is a small base sizer necessary for my AR-10 or LR-308?

It depends on your chamber. Plenty of .308 semi-autos feed just fine with a standard full-length die, but tighter chambers and some AR-10 or LR-308 rifles need the extra body sizing a small base die provides to chamber and extract cleanly. A quick chamber check with resized dummy rounds will tell you whether you need the small base profile.

Does this RCBS X Die come with a seating die too?

No, this is the sizer die only. It is meant to drop into your existing .308 Win setup if you already own a seater. If you are just getting started in this caliber, you would want the X Die Small Base Die Set, which pairs the sizer with a standard seater die.

Additional information

UPC

076683392596

Manufacturer

Manufacturer Part Number

39259

Shipping Weight

0.75

Reviews

There are no reviews yet.

Be the first to review “RCBS X Die Small Base Sizer Die .308 Win – 39259”