0
0

RCBS X Die Full Length Sizer Die .308 Win – 37809

UPC: 076683378095

$63.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If chasing case length with a trimmer every loading session has worn you out, the RCBS X Die Full Length Sizer is built to fix that. It's a sizer-only die for .308 Win bottleneck brass, machined from steel, and the whole point is a specially designed mandrel that rides inside the die with an expander ball and decapping pin attached. That mandrel is where the magic happens. Once you trim your cases 0.020 inch below max length to get them standardized, the mandrel limits how much the brass grows during resizing, so you skip the trim-after-every-shot grind.

How the X Die .308 Sizer Keeps Brass in Check

Regular full length dies push case material forward and the brass stretches a little more each time you size it. The X Die works differently. As the case grows, the mouth comes into contact with the mandrel stop during sizing, which reduces the growth rate rather than letting it run wild. Because of the tight tolerance between the mandrel and the neck wall, the neck doesn't thicken as the case gets pushed back. Cases run repeatedly through the die grow a few thousandths at first, then settle in below maximum length with no noticeable loss of accuracy or case life.

What You're Getting With the 37809 X Die

This is the standalone sizer, part number 37809, not a full set. It full length sizes the case body back toward factory spec and handles decapping in the same stroke. If you already have a seater you like or you're adding the X Die to an existing setup, this is the piece you want. Folks new to loading .308 from scratch usually grab the complete X Die set instead, since that pairs this sizer with a seating die.

One worth knowing: X Die sizers can still be used as a standard full length die with or without the X feature, so you're not locked in. For high-volume .308 loaders who want longer brass life and fewer passes on the trimmer, this die earns its spot on the bench.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .308 Winchester
  • Die Type: Full Length Sizer (Sizer Only)
  • Function: Full Length Sizing and Decapping
  • Material: Steel
  • Special Feature: Patented X Die mandrel to limit case growth
  • Initial Trim: 0.020 inch below max case length
  • Manufacturer Part Number: 37809
  • Model: X Die
  • UPC: 076683378095
  • Shipping Weight: 0.8 lb

What’s Included

  • RCBS X Die Full Length Sizer Die (.308 Win)
  • Mandrel with expander ball and decapping pin
  • Instruction sheet

Frequently Asked Questions

Is the RCBS X Die 37809 a complete die set or just the sizer?

This is the sizer-only die, part number 37809. It handles full length sizing and decapping but does not include a seating die. If you're loading .308 from scratch and need both, the complete X Die Full Length Set is the better pick since it adds a standard seater die.

Does the X Die really let me stop trimming my .308 brass?

Pretty much, yes. You trim your cases once, taking 0.020 inch off the maximum length to standardize them, and then the mandrel limits how much the brass grows during sizing. Cases will grow a few thousandths at first and then stabilize below maximum length, so you skip the trim-after-every-firing routine.

Will the X Die thicken my case necks over time?

No. The close tolerance between the mandrel and the die's neck wall means the neck does not thicken as the case is pushed back during sizing. RCBS notes there's no discernible loss of accuracy or case life even after repeated sizing.

Can I use the X Die as a regular full length sizer?

Yes. X Die sizers can be used for standard full length resizing with or without the X feature, depending on how you set up the mandrel. That gives you some flexibility if you want to run it like a conventional die for certain loads.

Additional information

UPC

076683378095

Manufacturer

Manufacturer Part Number

37809

Shipping Weight

0.8

Reviews

There are no reviews yet.

Be the first to review “RCBS X Die Full Length Sizer Die .308 Win – 37809”