0
0

RCBS 3-Die Roll Crimp Set .38-40 Win | Steel Reloading Dies

UPC: 076683356055

$116.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .38-40 Winchester is one of those old-world cartridges that rewards a careful handloader, and this RCBS set gives you the right tools to do it. It's a three-die steel set covering the full job: sizing, expanding, and seating with a roll crimp. If you shoot a Model 1892, a Colt Single Action Army, or any of the cowboy guns chambered in this round, having dedicated dies on the bench makes feeding your gun a whole lot easier than hunting for scarce factory ammo.

What the RCBS .38-40 Die Set Does on the Press

The steel sizer die brings the case back to spec and de-primes in one stroke. Because the .38-40 is a bottlenecked case, it isn't a carbide setup, so you'll want to lube your brass before sizing to keep things smooth and avoid stuck cases. The expander die opens the case mouth to the right diameter and puts a slight flare on it, which makes seating those fat .401 bullets far less fiddly. The seater die finishes the round by setting the bullet to depth and rolling a crimp into the case mouth to lock everything in place.

Why the Roll Crimp Matters for the .38-40 Win

That roll crimp is a big deal on this cartridge, especially if you run a tube-magazine lever gun. A solid crimp keeps bullets from getting shoved deeper under recoil and magazine spring pressure, which is a known quirk with .38-40 loads. Dialing in good neck tension and a clean crimp goes a long way toward reliable feeding and consistent ignition.

Built the Way RCBS Dies Always Are

These dies are machined to exacting tolerances, hardened, and finished to the standard RCBS has been known for over decades. They ship in the familiar green storage box, so everything stays together and protected between loading sessions. The .38-40 takes a little more attention than your average straight-wall pistol round, and this set gives you the solid, repeatable foundation to get it right.

Key Specifications

  • Brand: RCBS
  • Caliber: .38-40 Winchester (.38 WCF)
  • Die Set Type: 3-Die Roll Crimp Set
  • Sizer Die Material: Hardened Steel (case lubrication required)
  • Case Type: Bottleneck, straight-wall family
  • Bullet Diameter: .401 in
  • Manufacturer Part Number: 35605
  • UPC: 076683356055
  • Shipping Weight: 1.4063 lbs

What’s Included

  • Full-length steel sizer die with decapping unit
  • Expander die
  • Roll crimp seater die with bullet seater plug
  • Green RCBS storage box

Frequently Asked Questions

Does this RCBS .38-40 die set need case lube?

Yes. The sizer die is hardened steel rather than carbide, and the .38-40 is a bottlenecked case, so you need to lube your brass before sizing. A light coat is plenty; too much lube can dent the shoulder, so go sparingly and wipe the cases after.

What shell holder works with the .38-40 Winchester?

A shell holder is not included with this die set and is purchased separately. The .38-40 shares a rim size with the .44-40 and .45 Colt, so the same shell holder plate used for those cartridges will typically work. Match the shell holder to your specific press brand.

What bullet diameter should I load with these dies?

Despite the 38 in the name, the .38-40 actually uses .401 inch bullets, so it's really a .40 caliber round. The expander die opens the case mouth to accept those bullets and adds a light flare for easier seating. Cast lead sized to .401 is the traditional choice for this cartridge.

Will the roll crimp help with lever-action feeding?

That's one of the main reasons the roll crimp seater is useful here. In a tube-magazine lever gun, recoil and spring pressure can push bullets deeper into lightly crimped cases. A firm roll crimp paired with good neck tension helps keep your loads at the right length and feeding reliably.

Additional information

UPC

076683356055

Manufacturer

Manufacturer Part Number

35605

Shipping Weight

1.4063

Reviews

There are no reviews yet.

Be the first to review “RCBS 3-Die Roll Crimp Set .38-40 Win | Steel Reloading Dies”