0
0

RCBS Full-Length 2-Die Set 7.62x39mm – Group A Reloading Dies

UPC: 076683350015

$52.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Reloading the 7.62x39mm takes a die set built for that bottleneck case, and this RCBS Group A 2-Die Set covers the two jobs that matter most on the bench. One die handles full-length sizing, the other takes care of bullet seating, and both are machined from RCBS proprietary die steel to the same tight tolerances the company has been holding for decades. These dies thread into just about any standard press thanks to the universal 7/8"-14 thread, so they fit single stage and progressive presses from RCBS, Hornady, Lee, Lyman, Redding, Dillon and others.

How the RCBS 7.62x39mm Sizer Die Works

The Full-Length Sizer Die brings the fired case back down to SAAMI minimum dimensions, which is exactly what you want for a case headed into a semi-auto like an SKS or AK pattern rifle. It sizes the outside of the case, de-primes the spent primer, and expands the neck to accept the next bullet all in one stroke. The die body is vented to let trapped air and excess lubricant escape, which keeps your brass from getting dented or deformed during sizing. Headspace is held to minimum tolerances so the case body length stays put through the process.

Seating and Crimping With the Group A 2-Die Set

The Seater Die includes a bullet seater plug and a built-in roll crimper, so you can lock the bullet in place at the same moment you seat it. That matters with the 7.62x39mm since a solid crimp helps keep bullets from getting shoved back under the recoil and feeding of a semi-auto action. Large hex lock rings make height adjustments quick and repeatable once you dial in your load.

Keep in mind this set covers the .308 and .311 diameter bullets common to the 7.62x39mm, giving you flexibility depending on which projectiles you're loading. It's a straightforward, dependable setup for anyone looking to feed their 7.62×39 rifle with handloads tuned to their own spec.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 35001
  • UPC: 076683350015
  • Caliber: 7.62x39mm (.308/.311)
  • Product Type: Full-Length 2-Die Set
  • Series: Group A
  • Dies In Set: 2 (Full-Length Sizer, Bullet Seater)
  • Thread Size: 7/8"-14 Standard
  • Die Function: Sizer/Seater
  • Crimp Type: Built-in roll crimp
  • Shell Holder Included: No
  • Country of Origin: USA

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and built-in roll crimper
  • Hex lock rings

Frequently Asked Questions

Does the RCBS 7.62x39mm die set come with a shell holder?

No, the shell holder is not included with this set and is sold separately. You'll want to pick up the correct RCBS shell holder sized for the 7.62x39mm case head to run these dies. It's a common add-on for most RCBS die sets, so grab one if you don't already have it on your bench.

Will these RCBS dies fit my press if it isn't an RCBS press?

Yes. These dies use the industry standard 7/8"-14 thread, which fits nearly all single stage and progressive presses from RCBS, Hornady, Lee, Lyman, Redding, Dillon and more. That thread standard is universal across the reloading world, so compatibility is rarely an issue.

Does the seater die crimp the bullet in this 7.62x39mm set?

Yes, the Seater Die has a built-in roll crimper that secures the bullet at the same time it seats it. That's handy for the 7.62x39mm since a firm crimp helps hold the bullet steady through the feeding of a semi-auto action. You can adjust the amount of crimp as you set up the die for your load.

Does this set handle both .308 and .311 bullets?

This RCBS full-length set is built for the 7.62x39mm and covers the .308 and .311 diameter bullets commonly loaded for the cartridge. The sizer brings cases to SAAMI minimum dimensions, which is ideal for reliable feeding in semi-auto rifles. Just match your bullet choice to your bore for best accuracy.

Additional information

UPC

076683350015

Manufacturer

Manufacturer Part Number

35001

Caliber/Gauge

7.62 x 39mm

Length

5.9500

Product Type

Full Length Die Set

Shipping Weight

1.1125

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length 2-Die Set 7.62x39mm – Group A Reloading Dies”