0
0

RCBS Full Length Die Set Group D 8x68S Mag 34401

UPC: 076683344014

$96.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 8x68S Mag doesn't exactly fall into the everyday cartridge bin, so finding quality dies for it is a win on its own. This RCBS Group D set covers that odd-but-excellent European magnum with a Full-Length Sizer Die and a Seater Die, giving you everything needed to turn once-fired brass into fresh, ready-to-shoot ammo. These are machined from RCBS proprietary die steel to tight tolerances and get a careful finishing pass before they ever leave the shop, which is a big part of why RCBS dies have earned their reputation over the decades.

What the 8x68S Mag Sizer Die Handles

The sizer brings your cases back to SAAMI minimum dimensions, sizes the outside of the case, knocks out the spent primer, and expands the neck so it's ready to take a new bullet. It uses an Expander-Decapping Unit to do that job in one pull of the handle. The die body has vents machined in to let trapped air and extra case lube escape, which helps keep your brass from getting dented or dimpled during sizing. Headspace is held to minimum tolerances so the case body length stays where it should through full-length sizing.

Seating Bullets With the Group D Set

The Seater Die comes with a bullet seater plug and a built-in roll crimper, so you can seat your bullet and crimp it in a single step if your load calls for it. That makes for a cleaner workflow and consistent cartridge overall length round after round.

Fitting the RCBS 8x68S Die Set to Your Press

Both dies use the industry-standard 7/8-14 thread, so they'll thread into just about any single-stage or progressive press out there, RCBS or otherwise. They ship in the familiar green die box and are made in the USA. If you're loading for a rifle chambered in this fast 8mm magnum, this is the straightforward, proven route to feeding it.

Key Specifications

  • Manufacturer: RCBS
  • MPN: 34401
  • UPC: 076683344014
  • Caliber: 8x68S Mag
  • Die Group: Group D
  • Set Type: Full-Length 2-Die Set
  • Thread: 7/8-14 Standard
  • Die Material: Proprietary Die Steel
  • Crimp Type: Built-in Roll Crimper
  • Country of Origin: Made in USA
  • Shipping Weight: 1.35 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and built-in roll crimper
  • Green RCBS die storage box

Frequently Asked Questions

Will the RCBS 8x68S die set fit my press?

Yes. These dies use the industry-standard 7/8-14 thread, which fits nearly all single-stage and progressive presses from RCBS, Hornady, and most other major brands. You won't need a special press to run them.

What does the Group D sizer die actually do?

The full-length sizer resizes the outside of the case back to SAAMI minimum dimensions, removes the spent primer, and expands the neck to accept a new bullet in one stroke. Vents in the die help release trapped air and excess lube so your brass stays clean and undented.

Does the seater die crimp the bullet too?

It does. The seater die includes a bullet seater plug and a built-in roll crimper, so you can seat and crimp in the same step if your load calls for it. You can also back the crimp off and seat only if you prefer to crimp separately.

Do I need anything else to start loading 8x68S Mag with this set?

This is a two-die set, so you'll still want the basics like a press, shell holder, case lube, powder measure, and a scale. The dies themselves cover the sizing, decapping, and seating steps for the cartridge.

Additional information

UPC

076683344014

Manufacturer

Manufacturer Part Number

34401

Shipping Weight

1.35

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length Die Set Group D 8x68S Mag 34401”