0
0

RCBS Full Length Die Set Group D 7mm BR Rem (34101)

UPC: 076683341013

$96.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 7mm Bench Rest Remington is a precision cartridge, and loading it right starts with good tooling. This RCBS Group D set gives you two dies cut for the 7mm BR Rem: a full-length sizer with an expander-decapping unit and a seater die with a bullet seater plug. Everything is machined from RCBS's proprietary die steel and run through their finishing process, which is why these dies have earned a reputation that holds up at the bench and in the field.

What the 7mm BR Rem Die Set Handles

The full-length sizer brings your brass back down to SAAMI minimum cartridge dimensions. In one stroke it sizes the outside of the case, knocks out the spent primer, and expands the neck so the next bullet starts straight. Vents in the die body let trapped air and excess lube escape, so you avoid dented shoulders and stuck cases. Headspace is held to tight tolerances so the body length stays consistent through full-length sizing, which is the way to go if you share brass between rifles or want every round to chamber the same way.

Seating and Crimping with the Group D Set

The seater die uses a bullet seater plug and includes a built-in roll crimper, so you can secure the bullet and seat it in the same step if your load calls for a crimp. Both dies use the standard 7/8"-14 thread, so they drop into nearly any single stage or turret press from RCBS, Hornady, Lee, Lyman, and the rest.

Fitting the RCBS 7mm BR Die Set to Your Press

This is the two dies only, so you'll want RCBS shell holder #3 if it isn't already in your kit. These dies are made in the USA and carry RCBS's lifetime warranty, which is part of why reloaders keep coming back to them. Pair the set with quality brass and a good powder charge and you've got the foundation for accurate 7mm BR Rem loads.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: 7mm Bench Rest Remington (7mm BR Rem)
  • Projectile Caliber: .284
  • Type: Full Length 2-Die Set
  • Die Group: Group D
  • Thread: 7/8"-14 (standard)
  • Material: Proprietary Die Steel
  • Shell Holder Required: #3 (sold separately)
  • Manufacturer Part Number: 34101
  • UPC: 076683341013
  • Country of Origin: Made in USA
  • Warranty: RCBS Limited Lifetime Warranty

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and built-in roll crimper
  • Instruction manual
  • Green RCBS die box

Frequently Asked Questions

What cartridge is this RCBS die set made for?

This set is cut specifically for the 7mm Bench Rest Remington, also written as 7mm BR Rem, which uses .284 caliber bullets. Note that this is a different cartridge from the 7mm Remington Magnum, so make sure the 7mm BR Rem is what you're loading before ordering.

Does the 7mm BR Rem die set come with a shell holder?

No, this is the two dies only. The 7mm Bench Rest Remington uses RCBS shell holder #3, so grab one separately if you don't already have it in your kit.

Will these RCBS dies fit my press?

Yes, both dies use the industry standard 7/8"-14 thread. That means they'll thread into nearly any single stage or turret press from RCBS, Hornady, Lee, Lyman, and most other brands.

Can I crimp with the Group D seater die?

Yes, the seater die has a built-in roll crimper, so you can seat the bullet and apply a crimp in the same stroke if your load calls for it. You can also back the die off and skip the crimp if you'd rather seat only.

Additional information

UPC

076683341013

Manufacturer

Manufacturer Part Number

34101

Shipping Weight

1.1625

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length Die Set Group D 7mm BR Rem (34101)”