Description
If you're loading 6.5 Creedmoor for an AR-10 or any semi-auto, standard full-length dies can leave your brass a hair too fat at the case body, and that's when you get sticky chambering and failures to go into battery. This RCBS AR Series set solves that. The small base sizing die works the case body down a touch smaller than SAAMI minimum, giving your reloads the clearance they need to drop in and lock up reliably when the bolt is slamming them home under recoil.
What Sets the RCBS AR Series Small Base Die Set Apart
The second die in the set is a taper crimp seater, and it earns its keep on a progressive press. Instead of a roll crimp, the 7-degree taper is more forgiving when your case lengths vary a little from piece to piece, which is just reality when you're loading range brass in volume. That means fewer buckled shoulders and fewer bulged cases, especially if your bullets have a cannelure. Seat and crimp in one stroke and keep the press moving.
Build Quality You'd Expect From RCBS
Both dies are machined from case-hardened steel, precision drilled, reamed, and hand polished so they hold up to the abrasive wear that sizing dumps on a die over thousands of rounds. The large hex lock rings make adjustments quick and they stay put once you've dialed them in. Everything threads in at the standard 7/8-14, so these drop right into any single stage, turret, or progressive press that takes common dies.
Dialing In Your 6.5 Creedmoor Loads
These dies are built for feeding reliability in semi-autos, which is a different priority than chasing the absolute tightest groups out of a bolt gun. For a gas gun that has to run, that tradeoff is exactly what you want. The set ships in RCBS's plastic storage box with a loading data label, so you've got a tidy home for the dies and a handy reference right where you need it. No shell holder is included, so grab the correct one for 6.5 Creedmoor if you don't already have it on the bench.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 32907
- UPC: 076683329073
- Caliber: 6.5mm Creedmoor
- Series: AR Series (Small Base / Taper Crimp)
- Dies in Set: 2 (Small Base Sizer, Taper Crimp Seater)
- Crimp Type: 7-degree taper crimp
- Thread: 7/8-14
- Material: Case-hardened steel
- Gun Type: Rifle / semi-auto (AR platform)
- Shell Holder Included: No
What’s Included
- Small Base Sizing Die
- Taper Crimp Bullet Seating Die
- Plastic die storage box
- Loading data label
Frequently Asked Questions
What makes the RCBS AR Series small base die different from a standard 6.5 Creedmoor die set?
The sizing die in this set works the case body down smaller than SAAMI minimum specs, giving reloads extra clearance to chamber in a semi-auto. Standard full-length dies size for bolt guns and can leave brass slightly too tight for reliable feeding in an AR platform. If your rifle is gas-operated, the small base sizing is the feature you're paying for.
Why does this set use a taper crimp instead of a roll crimp?
A 7-degree taper crimp is more forgiving when case lengths vary a little across a batch, which is common when loading mixed or range brass. That forgiveness cuts down on buckled shoulders and bulged cases, especially on a progressive press running at speed. It's the right crimp for high-volume semi-auto loading.
Will these dies fit my press?
Yes. Both dies use the standard 7/8-14 thread, so they'll thread into any single stage, turret, or progressive press that accepts common reloading dies. RCBS designed the AR Series with progressive reloaders in mind, but they work fine on a single stage too.
Does the RCBS AR small base die set come with a shell holder?
No, a shell holder is not included with this set. You'll need the correct RCBS shell holder for 6.5 Creedmoor if you don't already have one on your bench. The set does include a plastic storage box and a loading data label.




Reviews
There are no reviews yet.