0
0

RCBS 8mm-06 Full Length Die Set – Group D (2-Die) 32601

UPC: 076683326010

$90.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 8mm-06 is one of those classic wildcats built off the venerable .30-06 case necked up to accept .323 bullets, and reloading it is pretty much the only practical way to feed it. That's where this RCBS Group D set earns its keep. It's a two-die setup made specifically for the 8mm-06 bottleneck case, giving you everything needed to size, deprime, and seat without hunting down odd components for a cartridge the ammo shelves forgot about.

What the 8mm-06 Die Set Does on the Bench

The full-length sizer brings your brass back to SAAMI minimum dimensions, so cases chamber smoothly in any properly cut 8mm-06 rifle. In one stroke it sizes the outside of the case, knocks out the spent primer, and expands the neck to grip the next bullet. The die body is vented, which lets trapped air and extra lube escape so you don't dent shoulders during sizing. RCBS also holds headspace to minimum tolerances here, which keeps the case body length from shifting around as you work through a batch.

Seating and Crimping with the 32601 Set

The seater die handles bullet placement and has a built-in roll crimper, so you can seat and crimp in the same motion if your load calls for it. The three-piece expander-decapping unit is a nice touch too, since swapping a bent or broken decapping pin takes just a few seconds instead of a whole teardown.

Build Quality You'd Expect from RCBS Group D

These dies are machined from RCBS proprietary die steel and run the standard 7/8-14 thread, so they drop right into any common single-stage or turret press. Fine body knurling makes adjustments easy without the die slipping on you. One thing to plan for: the shell holder is sold separately, and the 8mm-06 uses RCBS Shell Holder #3, the same one that fits the 30-06 and .308 family. Ships in the familiar green RCBS die box, made in the USA, and backed by the RCBS reputation for parts support down the road.

Key Specifications

  • Manufacturer: RCBS
  • Cartridge: 8mm-06 (8mm-06 Springfield)
  • Die Set Type: Full-Length 2-Die Set, Group D
  • Dies Included: Full-Length Sizing Die, Bullet Seating Die
  • Thread Size: 7/8-14
  • Material: RCBS Proprietary Die Steel
  • Compatible Shell Holder: RCBS #3 (sold separately)
  • Crimp: Built-in roll crimper in seater die
  • Country of Origin: United States
  • Manufacturer Part Number: 32601
  • UPC: 076683326010
  • Shipping Weight: 1.3063 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and built-in roll crimper
  • Green RCBS die storage box

Frequently Asked Questions

Does the RCBS 8mm-06 die set come with a shell holder?

No, the shell holder is sold separately like it is with most RCBS die sets. The 8mm-06 uses the RCBS #3 shell holder, which is the same one that fits the 30-06 and .308 Winchester family of cases. If you already load any of those cartridges, there's a good chance you have one on the bench already.

Will this die set fit my reloading press?

Yes. It uses the standard 7/8-14 thread, which is the common size for single-stage and turret presses from RCBS and other major brands. It threads right in without any adapters.

What exactly does the full-length sizer die do?

The full-length sizer resizes the entire outside of the case back to SAAMI minimum dimensions, removes the spent primer, and expands the case neck to accept a new bullet, all in one stroke. The die body is vented to let trapped air and excess lube escape so the shoulder doesn't get damaged. Just remember to lubricate your cases before full-length sizing.

Can this set crimp the bullet in place?

Yes, the seater die includes a built-in roll crimper, so you can seat and crimp in the same motion if your load calls for it. This is handy for hunting rounds or anything that might see rough handling in the field. If you'd rather not crimp, you can back the die off and just seat.

Additional information

UPC

076683326010

Manufacturer

Manufacturer Part Number

32601

Shipping Weight

1.3063

Reviews

There are no reviews yet.

Be the first to review “RCBS 8mm-06 Full Length Die Set – Group D (2-Die) 32601”