Description
RCBS has been turning out reloading gear for better than sixty years, and this Group A full-length 2-die set carries that reputation into the .300 Winchester Short Magnum. It's a clean, no-nonsense pairing of a full-length sizer die and a bullet seater die, built from case-hardened steel and finished to hold up to the abrasive wear that comes with sizing a hard-kicking magnum case season after season.
The sizer die works the full length of the fired case, bumping it back down to SAAMI minimum dimensions so your brass chambers smoothly in any .300 WSM rifle. It de-primes and expands the case neck in the same stroke thanks to the built-in expander-decapping unit, and vent holes in the die let trapped air and excess lube escape so you don't dent or buckle a case on the downstroke. Headspace is held to minimum tolerances, which keeps case body length consistent and your shoulder bumps repeatable.
What the .300 WSM Die Set Handles at the Bench
The seater die takes care of the other half of the job. It uses a bullet seater plug to set your projectile to depth and includes a built-in roll crimp if you want it. Prefer to seat without crimping? Back the die off until the crimp ring clears the case mouth and you've got a straight seating operation. Large hex lock rings with hex head set screws make adjustments quick and let you lock in a setting you can return to run after run.
Why Reloaders Reach for the RCBS .300 WSM 2-Die Set
Full-length sizing is the go-to choice when you're loading for a bolt gun that sees different brass, feeds from a magazine, or just needs reliable chambering trip after trip. These dies use the industry-standard 7/8"-14 thread, so they'll thread right into any modern single-stage or progressive press from RCBS, Hornady, Lee, Lyman and the rest. It's the kind of straightforward, dependable tooling that rewards you with ammo built to match the quality of your rifle.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 30801
- UPC: 076683308016
- Caliber: .300 Winchester Short Magnum (WSM)
- Series: Group A
- Die Type: Full-Length Sizer / Bullet Seater
- Dies In Set: 2
- Thread: 7/8"-14 (standard)
- Material: Case-hardened steel
- Gun Type: Rifle
- Sizing: Full-length to SAAMI minimum dimensions
What’s Included
- Full-Length Sizer Die with expander-decapping unit
- Bullet Seater Die with seater plug and built-in roll crimper
- Hex lock rings with set screws
- RCBS green die box
Frequently Asked Questions
What comes in the RCBS .300 WSM die set?
The set includes two dies: a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug and built-in roll crimper. Both arrive with hex lock rings in the standard RCBS green die box. You'll still need a shell holder sized for the .300 WSM case head, which is sold separately.
Will these dies fit my reloading press?
Yes. These RCBS dies use the industry-standard 7/8"-14 thread, so they'll thread into any modern single-stage or progressive press from RCBS, Hornady, Lee, Lyman and others. No adapter needed.
What's the difference between full-length sizing and neck sizing for .300 WSM?
Full-length sizing works the entire case back down to SAAMI minimum dimensions, which gives you reliable chambering across different rifles and smooth feeding from a magazine. Neck sizing only touches the case neck and is usually reserved for brass fired in a single bolt gun. For most .300 WSM shooters, the full-length route this set provides is the more versatile and dependable choice.
Can I seat bullets without crimping using this RCBS seater die?
Absolutely. The seater die has a built-in roll crimp, but you can skip it by backing the die off until the crimp ring no longer engages the case mouth. That lets you seat bullets to depth with no crimp, which many precision loads call for.




Reviews
There are no reviews yet.