Description
The .30-378 Weatherby Magnum is one of the hardest-hitting .30 caliber cartridges out there, and that big belted case deserves dies that can keep up. This RCBS Group A full-length set gives you everything needed to turn fired brass back into reliable, accurate ammo. It's a two-die setup designed for bottleneck cases, and like all RCBS dies it uses standard 7/8-14 threads, so it drops right into just about any single-stage or turret press you already own.
What the .30-378 Weatherby Mag Die Set Does
The full-length sizer die works the outside of the case back to SAAMI minimum dimensions, de-primes the spent case, and expands the neck so it's ready to accept the next bullet. Vent holes in the die let trapped air and excess lubricant escape, which keeps you from denting or crushing that expensive Weatherby brass. Headspace is held to minimum tolerances, so you're not stretching case body length every time you run a piece through. The seater die handles the other half of the job with a bullet seater plug that sets your projectile to the depth you dial in.
Why Handloaders Reach for the RCBS Group A Set
RCBS has been turning out reloading gear for over 60 years, and these die sets have earned a reputation in reloading circles for tight tolerances and consistency round after round. The bodies are cut from proprietary die steel, built to hold up through thousands of cycles. Folks who run .30-378 brass tend to point to RCBS as a go-to for repeatable results, which matters a lot when you're working with a case that burns a serious amount of powder.
Factory .30-378 ammo isn't cheap or always easy to find, so loading your own is one of the better ways to feed this cartridge and tune a load your rifle actually likes. This set gives you the two dies that do the heavy lifting, and it ships in the classic green RCBS box ready to mount up and get to work.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 29501
- UPC: 076683295019
- Caliber: .30-378 Weatherby Magnum
- Product Type: Full-Length Die Set
- Series: Group A
- Dies in Set: 2 (Sizer and Seater)
- Thread Size: 7/8-14
- Die Material: Proprietary Die Steel
- Case Type: Bottleneck Rifle
- Country of Origin: USA
- Shipping Weight: 1.35 lbs
What’s Included
- Full-length sizer die with expander-decapping unit
- Seater die with bullet seater plug
- RCBS green die storage box
Frequently Asked Questions
What does the RCBS .30-378 Weatherby Mag die set include?
This Group A set comes with two dies: a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer resizes the case, removes the spent primer, and expands the neck, while the seater sets your bullet to depth. Everything ships in the classic RCBS green box.
Will these dies fit my reloading press?
Yes. The dies use the industry-standard 7/8-14 thread, so they thread into virtually any single-stage, turret, or progressive press that accepts standard dies. You will want a shell holder sized for the .30-378 Weatherby case, which is sold separately.
Do I need a separate powder funnel or trimmer for the .30-378?
This is a two-die sizing and seating set, so a case trimmer, powder measure, and other reloading tools are not part of the package. Given how much the .30-378 case stretches with each firing, a good trimmer is worth having on the bench. The dies themselves hold headspace to minimum tolerances to help keep case growth in check.
Does the seater die crimp the bullet?
RCBS Group A seater dies include a built-in crimp feature that is matched to the cartridge, so it can seat and crimp in one step when you set it up that way. For most .30-378 precision loads, many handloaders choose to seat without crimping and leave a bit of neck tension to do the work. You can set the die up either way depending on your load.



Reviews
There are no reviews yet.