0
0

RCBS Full Length 2-Die Set Group D .30 Rem – 29201

UPC: 076683292018

$96.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .30 Remington is one of those classic rimless cartridges that reloaders have to feed themselves, and this RCBS Group D set is how you do it right. It's a two-die setup made for bottleneck cases, pairing a full-length sizer die with an expander-decapping unit alongside a seater die with a bullet seater plug. The sizer works the outside of the case, knocks out the spent primer, and opens the neck back up to take a fresh bullet, so one pass down the press handles most of the prep in a single stroke.

What the .30 Rem Group D Set Brings to the Bench

RCBS machines these dies from their own proprietary die steel to tight tolerances, then runs them through a careful finishing process. The full-length sizer brings cases back to SAAMI minimum cartridge dimensions, which is what keeps your reloads chambering smoothly in the old Remington autoloaders and pump guns this round lived in. Headspace is held to minimum tolerances so the case body length doesn't shift around during sizing, and vent holes in the die let trapped air and extra lube escape instead of denting your brass.

Seating and Crimping with the 29201 Die Set

The seater die carries a bullet seater plug and a built-in roll crimper, so you can set your seating depth and crimp the case mouth into the bullet's cannelure in one motion. That roll crimp is a nice touch for a cartridge used in tube-fed and autoloading rifles where bullet setback matters. Both dies use the standard 7/8-14 thread, so they'll thread straight into any common single-stage or turret press you've got on the bench.

Pairing Your Group D Set with a Shell Holder

One thing to plan for: a shell holder is sold separately. For .30 Remington you'll want the RCBS #19, which also covers 6.8 Remington SPC and .224 Valkyrie if you load those too. Grab one of those and your press is ready to run this set. For a cartridge you can't exactly walk in and buy factory ammo for anymore, having a quality die set like this makes keeping that rifle fed a whole lot easier.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .30 Remington
  • Die Set Type: Full-Length 2-Die Set (Group D)
  • Dies Included: Full-Length Sizer Die, Seater Die
  • Thread: 7/8-14 standard
  • Material: Proprietary die steel
  • Crimp Type: Built-in roll crimp
  • Compatible Shell Holder: RCBS #19 (sold separately)
  • Country of Origin: Made in USA
  • Manufacturer Part Number: 29201
  • UPC: 076683292018

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug
  • RCBS green die box

Frequently Asked Questions

Does the RCBS .30 Rem Group D set come with a shell holder?

No, the shell holder is sold separately with this set. For .30 Remington you'll want the RCBS #19 shell holder, which also fits 6.8 Remington SPC and .224 Valkyrie. You'll need to pick one up before your first loading session.

What dies are included in this two-die set?

You get a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer handles outside sizing, depriming, and neck expansion in one stroke, while the seater sets bullet depth and applies a roll crimp.

Will these dies fit my reloading press?

Yes. The dies use the standard 7/8-14 thread, so they'll thread into virtually any common single-stage or turret press. That makes this set an easy addition to most benches.

Does the seater die crimp the case?

It does. The .30 Rem seater die has a built-in roll crimper that secures the bullet at the same time it's seated. That's handy for a cartridge used in tube-fed and autoloading rifles where keeping the bullet in place matters.

Additional information

UPC

076683292018

Manufacturer

Manufacturer Part Number

29201

Shipping Weight

1.2188

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length 2-Die Set Group D .30 Rem – 29201”