0
0

RCBS AR Small Base Die Set 6mm x 45 (6mm-223) 2-Die Set 28907

UPC: 076683289070

$64.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 6mm x 45 is one of those wildcats that rewards a careful handloader, and this RCBS AR Series set gives you the two dies built specifically to keep those rounds running in a semi-auto. Also known as the 6mm-223, the cartridge is simply a .223 Remington case necked up to .243, which means you can form brass from plentiful .223 cases and load heavier, higher-BC 6mm bullets than the parent round allows. It's a favorite for varmints, predators, and light big game, and it feeds nicely from AR-pattern magazines when the brass is sized right. That last part is exactly what this set handles.

What the 6mm x 45 Small Base Die Set Does Differently

The small base sizer die is the heart of this setup. It squeezes the case body and shoulder down tighter than a standard full-length die, pushing the brass smaller than SAAMI specs. That extra bit of resizing matters in a gas gun, where the action slams cases into the chamber with a lot more authority than a bolt rifle. Sizing to minimum dimensions helps guarantee that rounds drop in and chamber cleanly shot after shot, which is where a lot of semi-auto feeding headaches come from in the first place.

Taper Crimp Seating for Semi-Auto Reliability

The second die is a taper crimp seater with a 7-degree crimp. A taper crimp is more forgiving than a roll crimp when your case lengths vary a little, so you get fewer buckled shoulders and bulged cases, especially if you're running mixed-length brass or loading on a progressive press. It grips the bullet so it won't set back under recoil or during the rough handling of feeding, and it seats and crimps in one step.

Fitting the RCBS 6mm x 45 Dies to Your Press

These are standard 7/8"-14 threaded dies, so they'll thread into any single stage, turret, or progressive press that takes common dies. The shellholder is sold separately, so grab the correct one for the .223-based case head if you don't have it already. The dies ship in a black RCBS box with printed instructions to get your adjustments dialed in.

Key Specifications

  • Manufacturer: RCBS
  • Series: AR Series Small Base Taper Crimp
  • Caliber: 6mm x 45 (6mm-223 Remington)
  • Number of Dies: 2
  • Die Set Contents: Small Base Sizer Die, Taper Crimp Seater Die
  • Crimp Type: 7-degree taper crimp
  • Sizing Type: Full-length small base
  • Thread: 7/8"-14
  • Intended Platform: AR-pattern and semi-automatic rifles
  • Shellholder Included: No, sold separately
  • Manufacturer Part Number: 28907
  • UPC: 076683289070
  • Shipping Weight: 1.2 lbs

What’s Included

  • Small Base Sizer Die
  • Taper Crimp Seater Die
  • Printed instructions
  • Black RCBS die box

Frequently Asked Questions

Why use a small base die for the 6mm x 45 instead of a standard die?

A small base die sizes the case body and shoulder smaller than a standard full-length die, pushing it below SAAMI dimensions. That extra resizing matters in AR-pattern and other semi-autos, where the action chambers rounds with a lot of force. The tighter sizing helps guarantee reliable feeding and chambering round after round.

Is this die set compatible with my press?

Yes, these are standard 7/8"-14 threaded dies, so they'll thread into virtually any single stage, turret, or progressive press that accepts common reloading dies. The set is especially popular with progressive reloaders. Just make sure your press is set up for standard die threads and you're good to go.

Does the RCBS 6mm x 45 die set include a shellholder?

No, the shellholder is sold separately. Since the 6mm x 45 is based on the .223 Remington case, you'll want the shellholder that fits the .223 case head. If you already load .223 or 5.56, you likely have the correct one on hand.

What is the 6mm x 45 and why would I reload it?

The 6mm x 45, also called the 6mm-223, is a wildcat made by necking up a .223 Remington case to .243. Because it isn't a standardized factory cartridge, it's almost entirely a handloader's round, which makes a dedicated die set like this essential. It's valued for mild recoil, easy brass forming from common .223 cases, and the ability to run heavier, higher-BC 6mm bullets for varmints, predators, and light game.

Additional information

UPC

076683289070

Manufacturer

Manufacturer Part Number

28907

Shipping Weight

1.2

Reviews

There are no reviews yet.

Be the first to review “RCBS AR Small Base Die Set 6mm x 45 (6mm-223) 2-Die Set 28907”