Description
The .28 Nosler is a fast, flat-shooting long-range cartridge, and getting the most out of it starts with brass that's sized right and bullets that seat consistent. This RCBS Full Length Die Set covers both jobs with a two-die layout aimed at bottleneck cases. You get a Full-Length Sizer Die with an expander-decapping unit and a Seater Die with a bullet seater plug, so one set handles resizing, de-priming, and bullet seating from start to finish.
What the RCBS .28 Nosler Sizer Die Handles
The sizer brings fired cases back to SAAMI minimum dimensions, working the outside of the case while the expander-decapping unit knocks out the spent primer and opens the neck to grip the next bullet. Headspace is held to minimum tolerances, which keeps the case body length from shifting during full-length sizing. RCBS also vents the sizer die to let trapped air and excess lube escape, which helps keep your brass from getting dinged up in the process. That's the kind of detail that matters when you're feeding an expensive magnum chamber.
Build and Fitment on the 27401 Die Set
These dies are machined from case-hardened steel, hardened and hand-polished to shrug off the abrasive wear that comes with years of sizing. The large hex lock rings use hex-head setscrews that lock in your settings without chewing up the die threads, so once you dial it in you can pull the dies and drop them back without re-adjusting. Standard 7/8"-14 threads mean this set runs in just about any single-stage or turret press on the market.
Seating and Crimping with the RCBS .28 Nosler Dies
The Seater Die includes a built-in roll crimper, so you can seat and crimp in a single stroke, or back the die off if you'd rather seat without crimping for a precision load. The whole set ships in a stackable plastic storage box with a loading data label, giving you a tidy place to record your favorite recipes and keep everything protected on the bench. For handloaders chasing tight groups out of a .28 Nosler, this is a solid, no-nonsense foundation to build on.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 27401
- Model: Group D Precisioneered 2-Die Set
- UPC: 076683274014
- Caliber: .28 Nosler
- Die Type: Full Length Sizer & Bullet Seater
- Number of Dies: 2
- Carbide: No
- Material: Case-Hardened Steel
- Thread: 7/8"-14
- Case Type: Bottleneck
- Length: 5.95 in
- Shipping Weight: 1.26 lb
What’s Included
- Full-Length Sizer Die with expander-decapping unit
- Seater Die with bullet seater plug and built-in roll crimper
- Hex lock rings with setscrews
- Stackable plastic storage box
- Loading data label
Frequently Asked Questions
What comes in the RCBS .28 Nosler die set?
This is a two-die set that includes a Full-Length Sizer Die with an expander-decapping unit and a Seater Die with a bullet seater plug. The sizer resizes the case, removes the spent primer, and opens the neck, while the seater sets bullet depth and can crimp in the same stroke. Everything ships in a stackable storage box with a loading data label. Note that a shell holder is not included.
Will this RCBS die set fit my reloading press?
Yes. The 27401 set uses the standard 7/8"-14 thread, which is the common sizing used by nearly all single-stage and turret presses. If your press takes standard dies, this one threads right in.
Can I seat bullets without crimping using the seater die?
You can. The Seater Die has a built-in roll crimper for seating and crimping together, but if you want to seat without crimping you simply back the die off until the crimp ring no longer contacts the case mouth. That flexibility lets you load for a tight precision crimp-free round or a secured hunting load.
Is this a carbide die set?
No, these are case-hardened steel dies rather than carbide. For bottleneck rifle cartridges like the .28 Nosler, that is the standard setup, and you'll want to use case lube when full-length sizing. The dies are hardened and hand-polished to hold up to years of sizing wear.





Reviews
There are no reviews yet.