Description
The 5.6×50 Rimmed is one of those cartridges you won't find factory ammo stacked on every shelf, which makes a quality die set like this a real asset at the bench. This RCBS Full Length Die Set Group D is a two-die setup made specifically for the rimmed version of the 5.6×50, a German sporting round with roots tracing back to the .222 Remington Magnum family. It's a bottleneck cartridge, and these dies handle the full job of bringing fired brass back to spec and seating a fresh bullet.
The set includes a Full-Length Sizer Die paired with an expander-decapping unit, plus a Seater Die with a bullet seater plug. The sizer brings the case back to SAAMI minimum cartridge dimensions, sizes the outside of the case, knocks out the spent primer, and expands the neck so it's ready to take a new bullet. The die body is vented to let trapped air and excess lube escape, which keeps your cases from getting dented or buckled during the sizing stroke. Headspace is held to tight tolerances so the case body length stays consistent run after run.
What Makes the RCBS Group D Die Set Tick
RCBS machines these from their proprietary die steel to exacting tolerances and runs them through a careful finishing process. Both dies use the standard 7/8"-14 thread, so they'll thread right into any common single stage or turret press without any fuss. The seater die includes a built-in roll crimp if you want to lock the bullet in place as it's seated.
Loading the 5.6×50 Rimmed at Home
Because this is an uncommon European caliber, having a dedicated die set on hand means you can keep feeding your drilling or single shot rifle long after store-bought ammo gets scarce. These are made in the USA and ship in the familiar green RCBS die box. If you already run RCBS gear on your bench, these will feel right at home and match the quality you'd expect from a company that's been building reloading tools since 1943.
Key Specifications
- Manufacturer: RCBS
- Caliber: 5.6x50mm Rimmed
- Die Type: Full-Length Sizing Die and Bullet Seating Die
- Set Group: Group D
- Number of Dies: 2
- Cartridge Type: Bottleneck Rifle
- Thread: 7/8"-14 Standard
- Die Material: Proprietary Die Steel
- Crimp Style: Roll Crimp (built into seater die)
- Country of Origin: Made in USA
- Manufacturer Part Number: 26301
- UPC: 076683263018
- Shipping Weight: 1.2313 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug
- Green RCBS die box
Frequently Asked Questions
What dies come in the RCBS Group D 5.6×50 Rimmed set?
You get two dies: a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer brings your brass back to SAAMI minimum dimensions, removes the spent primer, and opens the neck for a new bullet. The seater handles bullet seating and includes a built-in roll crimp.
Will this die set fit my reloading press?
Yes. These dies use the standard 7/8"-14 thread, which is the industry-standard size for single stage and turret presses. As long as your press takes standard threaded dies, this set will thread right in.
Is this set for the rimmed or rimless 5.6×50?
This set is made for the rimmed version, the 5.6×50 Rimmed, also written as 5.6x50R Magnum. The rimmed and rimless 5.6×50 cartridges have different case dimensions, so make sure your brass matches the rimmed designation before ordering.
Do I need a shell holder with this die set?
A shell holder is not included and is sold separately. You'll want the correct shell holder sized for the 5.6×50 Rimmed case head before you start loading. RCBS makes shell holders that pair with their presses and dies.



Reviews
There are no reviews yet.