Description
Loading big-bore straight-wall cases like the .460 S&W Magnum calls for dies that can keep up, and this RCBS Carbide 3-Die Set is built exactly for that job. The star of the set is the carbide sizing ring, which is extremely hard and slick enough to size and de-prime your cases without a drop of lube. If you have ever fought a stuck case or spent extra time wiping lube off finished rounds, you already know why that matters, especially when you are running a stack of cases at the bench.
What Comes in the RCBS .460 S&W Die Set
This is a true three-die setup. The carbide sizer die sizes the brass and knocks out the spent primer in one stroke. The expander die opens the case mouth to the right diameter and adds a touch of flare so your bullet starts straight and seats clean. The seater die then drops the bullet to your chosen depth and applies a roll crimp, which is the crimp style you want for a heavy-recoiling revolver round like the .460 to keep bullets from walking under recoil.
How the Carbide Roll Crimp Set Handles at the Bench
The dies use large hex lock rings with hex head setscrews, so adjustments stay put once you dial them in and you do not need any special tools to set them up. They carry the standard 7/8-14 thread, which means they thread right into nearly any single stage or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and more. The sizer is hardened and hand polished to shrug off the abrasive wear that comes with years of sizing brass.
Worth Knowing Before You Order the .460 S&W Set
The set ships in a plastic storage case to keep everything organized between sessions, and it is backed by the RCBS lifetime warranty. Keep in mind the shell holder is sold separately, so grab the correct one for the .460 S&W if you do not have it already. For anyone feeding a big X-Frame revolver or lever gun chambered in this cartridge, this set covers every step of the process from sizing to a finished, crimped round.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 24212
- UPC: 076683242129
- Caliber: .460 S&W Magnum
- Product Type: Carbide 3-Die Set
- Die Series: Group B
- Dies Included: Sizer / Expander / Seater
- Crimp Style: Roll Crimp
- Thread Size: 7/8"-14
- Sizer Type: Carbide, no case lube required
- Lock Rings: Hex with hex head setscrews
- Shell Holder Included: No, sold separately
- Country of Origin: USA
- Warranty: RCBS Lifetime Warranty
- Shipping Weight: 1.7 lbs
What’s Included
- Carbide Sizer Die with decapping unit
- Expander (belling) Die
- Seater Die with roll crimp and bullet seater plug
- Instructions
- Warranty card
- Plastic storage case
Frequently Asked Questions
Do I need case lube with the RCBS .460 S&W carbide die set?
No, the carbide sizing ring is hard and slick enough to size straight-wall cases without lube. That saves you the step of lubing before and wiping down after. It also helps cut down on stuck cases when you are loading in volume.
Does this set include a shell holder?
No, the shell holder is sold separately, which is standard for RCBS die sets. Be sure to pick up the correct shell holder for the .460 S&W Magnum if you do not already have one so you are ready to load.
Will these dies fit my press?
Yes, they use the industry standard 7/8-14 thread. That means they thread into nearly any single stage or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and others.
What kind of crimp does the seater die apply?
The seater die seats the bullet and applies a roll crimp in the same stroke. A roll crimp is a good match for a hard-kicking revolver cartridge like the .460 S&W, since it helps keep bullets from working loose under heavy recoil.




Reviews
There are no reviews yet.