0
0

RCBS 3-Die Roll Crimp Set .458 Lott – Group C (24104)

UPC: 076683241047

$80.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .458 Lott is one of those cartridges that demands a crimp you can count on, and this RCBS three-die set is built to deliver exactly that. Designed for straight-walled rifle cases, the set handles the full loading cycle for the Lott: sizing, expanding, and seating with a firm roll crimp. For a cartridge this stout, that roll crimp matters more than usual since heavy 480 to 500 grain bullets want to creep forward under the brutal recoil these big fifty-eight calibers generate.

What the RCBS .458 Lott Die Set Does on the Press

The hardened steel Sizer Die brings fired brass back to spec and knocks out the spent primer in one stroke. Keep in mind the Lott is a belted, straight-tapered case, so case lubrication is required before sizing to avoid a stuck case. From there, the Expander Die opens the case mouth to the correct diameter and adds just enough bell so you can start those fat .458 bullets without shaving lead or crumpling brass. The Seater Die finishes the job, pushing the bullet to depth and rolling the case mouth into the crimp groove for a secure, repeatable hold.

Why the Roll Crimp Matters for the .458 Lott

This cartridge was born for African dangerous game, pushing a 500-grain bullet north of 2,300 fps for well over 5,000 ft-lbs of energy. Loads like that pound the cartridges still sitting in the magazine, and a loose bullet can tie up a rifle at the worst possible moment. The roll crimp on this set grips the bullet in its cannelure and shuts down bullet movement, which is exactly what you want when the follow-up shot counts. One of the nicer perks of handloading the Lott is flexibility, letting you work up full-house buffalo and elephant loads or dial things back toward .458 Win Mag ballistics for practice without beating yourself up at the bench.

Built to the Usual RCBS Standard

These dies use the standard 7/8-14 thread and drop straight into any common single-stage or turret press. RCBS machines them to tight tolerances and backs them with a long-standing reputation among reloaders who run big bores, so you get consistent, dependable ammo trip after trip.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 24104
  • UPC: 076683241047
  • Caliber: .458 Lott
  • Die Set Type: 3-Die Roll Crimp Set
  • Die Group: Group C
  • Case Type: Straight-walled, belted
  • Sizer Die Material: Hardened steel
  • Thread: 7/8-14 standard
  • Case Lubrication: Required for sizing
  • Shipping Weight: 1.9 lbs

What’s Included

  • Full-length Sizer Die with decapping unit
  • Expander Die
  • Roll Crimp Seater Die
  • RCBS die box

Frequently Asked Questions

What dies come in the RCBS .458 Lott 3-die set?

You get three dies: a hardened steel Sizer Die with a decapping unit, an Expander Die, and a Roll Crimp Seater Die. The Sizer resizes and de-primes the brass, the Expander opens and bells the case mouth to accept the bullet, and the Seater sets bullet depth while applying the roll crimp. That covers the full loading cycle for straight-walled Lott brass.

Do I need to lubricate cases with this set?

Yes. The Sizer Die is steel, not carbide, so case lubrication is required before running brass through it. Skipping lube on a big belted case like the .458 Lott is a quick way to end up with a stuck case, so a light, even coat of sizing lube is the move here.

Why does the .458 Lott need a roll crimp instead of a taper crimp?

The Lott generates heavy recoil that can shove bullets forward in the cases still in the magazine. A roll crimp rolls the case mouth into the bullet's cannelure for a firm mechanical lock that resists that movement. For a dangerous-game cartridge where reliable feeding and a ready follow-up shot matter, that solid crimp is worth having.

Will this die set work in my press?

It uses the standard 7/8-14 thread, so it fits common single-stage and turret presses from the major brands. As long as your press takes standard threaded dies and has the frame to handle a cartridge this size, you're good to go.

Additional information

UPC

076683241047

Manufacturer

Manufacturer Part Number

24104

Shipping Weight

1.9

Reviews

There are no reviews yet.

Be the first to review “RCBS 3-Die Roll Crimp Set .458 Lott – Group C (24104)”