0
0

RCBS 3-Die Roll Crimp Set – Group B – .500 S&W/Special (23808)

UPC: 076683238085

$81.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .500 S&W is one of the hardest-hitting handgun rounds out there, and loading for it means you need dies that can handle big cases and heavy bullets without complaint. This RCBS Group B set covers that exact job. It's a three-die arrangement machined from steel and built for straight-wall revolver cartridges, giving you everything required to turn empty brass back into finished ammo.

The set breaks down the way most RCBS pistol die sets do. The sizer die resizes the case back to spec and decaps the spent primer in one pull of the handle. Since these are steel dies rather than carbide, you'll want to run a little case lube before sizing to keep things moving smoothly and protect the brass. The expander die opens the case mouth to the right diameter and adds a touch of flare so your bullet starts straight instead of shaving lead or crumpling a case wall.

What Sets the Group B Roll Crimp Dies Apart

The standout piece here is the roll crimp seater die. A roll crimp rolls the case mouth into the bullet's cannelure and locks it down hard, which matters a lot in a thumping revolver like the big X-Frame. Under .500 S&W recoil, bullets in the other chambers want to jump forward and tie up the cylinder. A proper roll crimp keeps them planted so the gun stays running. This is the reason roll crimp dies are the go-to for heavy-recoiling wheelgun loads rather than the taper crimp you'd use on a semi-auto round.

Fit and Compatibility for the RCBS .500 Die Set

This set threads into any standard 7/8-14 reloading press, so it drops right into the RCBS Rock Chucker, a turret, or most any single-stage or progressive press using that common thread. RCBS machines these to tight tolerances and finishes them to hold up over a lot of loading sessions, which is what you want when you're feeding a cartridge that burns through good brass and premium bullets. Pair it with the correct shell holder and a reliable powder measure and you're set to build consistent, hard-hitting .500 ammo at home.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 23808
  • UPC: 076683238085
  • Caliber: .500 S&W / .500 Special
  • Die Group: Group B
  • Set Type: 3-Die Roll Crimp Set
  • Die Material: Steel (case lubrication required)
  • Crimp Style: Roll Crimp
  • Thread: 7/8-14
  • Cartridge Type: Straight-Wall Pistol/Revolver
  • Country of Origin: USA
  • Shipping Weight: 1.45 lbs

What’s Included

  • Steel Sizer Die with decapping unit
  • Expander Die
  • Roll Crimp Seater Die

Frequently Asked Questions

Do I need to lube my cases with this RCBS .500 S&W die set?

Yes. This is the steel version of the Group B set, not carbide, so the sizer die needs lubricated cases to work properly. A light coat of case lube before sizing keeps the brass moving smoothly and protects both the cases and the die. Wipe the lube off before loading powder.

What's the difference between a roll crimp and a taper crimp on these dies?

A roll crimp rolls the case mouth into the bullet's cannelure to lock it tight, which is ideal for heavy-recoiling revolver cartridges like the .500 S&W. A taper crimp simply straightens the flare and is used for semi-auto rounds that headspace on the case mouth. This set uses a roll crimp seater, exactly what you want for a big wheelgun load.

Will this RCBS Group B set fit my press?

It uses the standard 7/8-14 thread, so it fits the RCBS Rock Chucker and nearly any single-stage, turret, or progressive press on the market. You'll just need the correct shell holder for the .500 S&W case, which is sold separately.

Does this set load both .500 S&W Magnum and .500 Special?

Yes. The dies are spec'd for the .500 S&W/.500 Special family of straight-wall cases. Just be sure you're following published load data for whichever cartridge you're building.

Additional information

UPC

076683238085

Manufacturer

Manufacturer Part Number

23808

Shipping Weight

1.45

Reviews

There are no reviews yet.

Be the first to review “RCBS 3-Die Roll Crimp Set – Group B – .500 S&W/Special (23808)”

Related Products