Description
The .416 Remington Magnum is a serious big-bore cartridge, and loading for it right means having dies you can trust to size brass back into spec every single time. This RCBS Full-Length Die Set covers exactly that. It's a two-die setup made for bottleneck cases, pairing a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with a Bullet Seater Plug. The sizer works the outside of the case, knocks out the old primer, and opens the neck up to take the next bullet, all in one stroke.
What the .416 Rem Mag Die Set Does on the Press
The sizing die brings your brass down to SAAMI minimum cartridge dimensions, which is what keeps your reloads chambering smoothly in any .416 Rem Mag rifle. Headspace is held to minimum tolerances so the case body length doesn't drift during full-length sizing, and the die body is vented to let trapped air and extra lube escape instead of denting your brass. The seater die includes a built-in roll crimper, so you can lock the bullet in place at the same moment you set your seating depth, which is handy on a hard-recoiling round like this one where bullet pull matters.
Fitting the RCBS .416 Rem Mag Dies to Your Setup
These dies use the standard 7/8-14 thread, which means they'll thread right into nearly any single-stage, turret, or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and plenty of others. The set uses RCBS shell holder #4, sold separately if you don't already have one on the bench. Everything is machined from proprietary die steel and ships in the familiar green RCBS die box to keep things organized and protected between loading sessions.
RCBS backs these dies with a limited lifetime warranty to the original owner, so if anything ever goes sideways due to materials or workmanship, they'll make it right. For a cartridge that isn't exactly cheap to feed, having dies this dependable makes building quality ammo a lot more rewarding.
Key Specifications
- Manufacturer: RCBS
- Caliber: .416 Remington Magnum
- Die Type: Full-Length Two-Die Set
- Dies In Set: 2 (Full-Length Sizer, Bullet Seater)
- Series: Group D – Bottleneck Rifle Cartridges
- Thread: Standard 7/8-14
- Material: Proprietary Die Steel
- Shell Holder: RCBS #4 (sold separately)
- Crimp: Built-in roll crimper in seater die
- Warranty: Limited Lifetime (original owner)
- Country of Origin: USA
- Manufacturer Part Number: 22701
- UPC: 076683227010
- Shipping Weight: 1.45 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug
- Green plastic die storage box
- RCBS reloading dies instruction manual
Frequently Asked Questions
What shell holder do I need for the RCBS .416 Rem Mag die set?
This set uses RCBS shell holder #4 for the .416 Remington Magnum case head. The shell holder is not included in the die set, so you'll want to add one if it isn't already in your kit. It threads into your press ram and holds the case while the dies do their work.
Will these RCBS dies fit presses other than RCBS?
Yes. The dies use the industry-standard 7/8-14 thread, which fits nearly all single-stage, turret, and progressive presses from brands like Hornady, Lee, Lyman, Redding, and Dillon. If your press takes standard dies, this set will thread right in.
Does the seater die crimp the bullet?
It can. The seater die has a built-in roll crimp ring that lets you crimp the case mouth into the bullet as you seat it. You can adjust the die to crimp or skip the crimp depending on how you set the seating depth, which gives you flexibility for a hard-recoiling round like the .416 Rem Mag.
What does full-length sizing do compared to neck sizing?
Full-length sizing works the entire outside of the case back down to SAAMI minimum dimensions, not just the neck. That keeps your loaded rounds chambering reliably across different rifles and after brass has been fired a few times. For a big-bore hunting cartridge like the .416 Rem Mag, that dependable chambering is usually worth it.





Reviews
There are no reviews yet.