Description
This is RCBS's Group E carbide die set built for the whole .32 straight-wall family. The 21415 covers .32 S&W Long, .32 H&R Magnum, and .327 Federal Magnum, so one set on the bench handles everything from gentle target plinkers to full-house magnum loads. It's machined from polished, heat-treated steel and built to the tight tolerances RCBS has been known for over the decades, which is exactly what you want when you're working with a cartridge as small and precise as the .32.
Three dies do the work here. The carbide sizer die resizes the case and knocks out the spent primer in one stroke, and because the sizing ring is carbide, you don't need to lube your brass first. The expander die opens the case mouth to the right diameter and adds a touch of flare so your bullets start straight and seat clean. The seater die then sets the bullet to depth and applies a taper crimp to finish the round.
What the RCBS 21415 Die Set Does on the Press
The taper crimp in this set is worth understanding before you buy. Taper crimping shines with semi-auto target pistols and plated or jacketed bullets where you want a clean, straight case mouth without biting into the bullet. Many revolver loads with cannelured cast bullets lean toward a roll crimp instead, so it's worth matching the set to how you actually shoot. The .32 S&W Long in particular has a loyal following among bullseye and international competition shooters thanks to its reputation for accuracy, and this set feeds that crowd well.
Loading Multiple Calibers With One RCBS Set
Because the .32 S&W Long, .32 H&R Magnum, and .327 Federal Magnum all share the same case head and bullet diameter, this single set bridges all three. That's a real convenience if you own a .327 Federal revolver that also chews through the shorter, lower-pressure cases for practice. Note that a shellholder is sold separately, so grab the correct RCBS shellholder if you don't already have one on hand.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 21415
- UPC: 076683214157
- Die Set Type: Carbide 3-Die Set
- Crimp Type: Taper Crimp
- Die Group: Group E
- Caliber: .32 S&W Long / .32 H&R Magnum / .327 Federal Magnum
- Material: Polished, heat-treated steel with carbide sizing ring
- Number of Dies: 3
- Case Lube Required: No (carbide sizer)
- Shellholder Included: No, sold separately
- Overall Length: 6 in
What’s Included
- Carbide sizer die with decapping unit
- Expander die
- Seater die with taper crimp
- Plastic storage case
Frequently Asked Questions
What calibers does the RCBS 21415 die set load?
This set covers .32 S&W Long, .32 H&R Magnum, and .327 Federal Magnum. All three cartridges share the same case head and bullet diameter, so the one set handles the whole family. You adjust the seater and crimp for each cartridge length as you go.
Do I need to lube my cases with this carbide die set?
No. The carbide sizing ring in the sizer die lets you resize brass without applying case lube first, which saves a messy step and cuts down on cleanup. It's one of the main reasons shooters step up to carbide pistol dies.
Is a taper crimp or roll crimp better for the .32 S&W Long?
It depends on your bullet and firearm. Taper crimps work well with plated or jacketed bullets and semi-auto target pistols where you want a clean case mouth. Many revolver loads using cast bullets with a cannelure favor a roll crimp, so match the crimp to how you shoot.
Does this RCBS set come with a shellholder?
No, the shellholder is sold separately. You'll want to pick up the correct RCBS shellholder for the .32 case head if you don't already have one. The set does ship in a plastic storage case to keep the dies organized.





Reviews
There are no reviews yet.