Description
This RCBS 21412 set covers three straight-wall cartridges off one carbide die set: .32 S&W Long, .32 H&R Magnum, and .327 Federal. That's handy because those cases share a common base diameter, so one tool keeps your whole .32 revolver lineup fed. RCBS pioneered the 3-die concept for straight-wall pistol and rifle cases, and this Group E set carries that same reputation for tight tolerances and clean, repeatable loads.
What's Inside the RCBS 21412 Die Set
You get three dies that each do a specific job. The carbide sizer die resizes the fired case and de-primes it in one stroke. The expander die opens the case mouth to proper bullet diameter and adds a slight bell so bullets start straight without shaving lead. The seater die then seats the bullet and applies a roll crimp, locking the bullet in place so it holds up under recoil in a revolver cylinder.
Why the Carbide Sizer Earns Its Keep
The real time-saver here is the tungsten-carbide sizing ring. It's diamond-lapped and polished so smooth that brass glides through without sticking or scratching, which means you can skip case lubing altogether. For anyone who's spent an afternoon wiping lube off hundreds of pistol cases, that's a genuine step out of the process. The ring also helps extend case life since you're not dragging brass across a bare steel surface.
Fitment and Everyday Use
The dies use the standard 7/8-14 thread, so they drop right into nearly any single-stage or progressive press, RCBS or otherwise. They're machined from RCBS proprietary die steel, heat-treated, and hand-inspected before they ship. The whole set arrives in a plastic storage case to keep everything organized on the bench, and like all RCBS dies, it's covered by their lifetime guarantee. If you shoot any of the .32 family revolvers and want consistent, good-looking reloads, this is the workhorse set to reach for.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 21412
- UPC: 076683214126
- Calibers: .32 S&W Long / .32 H&R Magnum / .327 Federal
- Die Group: Group E (Straight-Walled Cartridges)
- Number of Dies: 3
- Crimp Style: Roll Crimp
- Sizer Type: Carbide (tungsten-carbide ring)
- Lube Required: No
- Thread: Standard 7/8-14
- Die Material: RCBS Proprietary Die Steel
- Country of Origin: USA
- Shipping Weight: 1.425 lbs
What’s Included
- Carbide sizer die with decapping unit
- Expander die
- Seater die with roll crimp
- Plastic storage case
Frequently Asked Questions
What calibers does the RCBS 21412 die set load?
This Group E set handles .32 S&W Long, .32 H&R Magnum, and .327 Federal. Those cartridges share the same base and bullet diameter, so one carbide set covers all three. That makes it a convenient pick if you shoot more than one of the .32 revolver rounds.
Do I need to lube my cases with this carbide die set?
No. The tungsten-carbide sizing ring is diamond-lapped and polished so brass passes through without sticking or scratching. That lets you skip the case lubing step entirely, which saves time and cleanup on pistol cases.
Will these dies fit my press?
Yes, they use the standard 7/8-14 thread found on nearly every single-stage and progressive press, whether it's RCBS, Hornady, or another brand. They thread right in without any adapters. RCBS dies are machined to tight tolerances and hand-inspected before shipping.
What's the difference between a roll crimp and a taper crimp here?
This set applies a roll crimp, which rolls the case mouth into the bullet's crimp groove to hold it firmly. That's the preferred crimp for revolver cartridges like these, since it keeps bullets from walking out under recoil. If you specifically need a taper crimp version, that's a separate configuration.




Reviews
There are no reviews yet.