Description
The .50-95 Winchester Express is one of those cartridges that factory ammo just doesn't keep up with anymore, so if you're running an original Model 1876 or a modern reproduction, handloading is pretty much the name of the game. This RCBS Legacy set gives you all three operations needed to turn fired brass into reliable rounds, and it's built specifically for this old big-bore so your reloads match the quality of the rifle they're going into.
The set covers the full process for straight-wall loading. The steel sizer die brings the case back to spec and de-primes in one stroke, and like any sizing operation on this style of brass, your cases need to be lubricated before they go in. The expander die opens the case mouth to the correct diameter and adds a flare, or bell, so bullets start cleanly without shaving lead or crumpling the case. The seater die finishes the job by setting your bullet to depth and applying a roll crimp, which is exactly what you want for a cartridge destined for a tube-magazine lever gun.
Why the RCBS Legacy .50-95 Set Earns Its Keep
The Legacy line exists for exactly this reason. These cartridges came out of the frontier and colonial hunting era, and RCBS keeps the series going so folks shooting vintage and repro black powder rifles still have proper tooling. Reloaders have had good luck forming .50-95 brass from reworked .50-90 Sharps cases with these dies, which is a real plus given how scarce factory .50-95 brass can be.
Setting Up the .50-95 Roll Crimp Dies
The dies use the standard 7/8-14 thread, so they'll thread right into any common single-stage or turret press. Keep in mind the shell holder is not part of this set and gets purchased separately. For the .50-95 you'll want RCBS Shell Holder #31. Most handloaders working this cartridge stick with moderate-pressure loads using cast lead or carefully chosen jacketed bullets, which plays nicely with the roll crimp and the gentle case-mouth flare this set provides.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 21304
- UPC: 076683213044
- Cartridge: .50-95 Winchester Express (50-95 WCF)
- Set Type: 3-Die Roll Crimp Set (Legacy Series)
- Dies Included: Sizer, Expander, Seater
- Die Operations: Sizing, Expanding/Belling, Seating with Roll Crimp
- Material: Steel
- Thread: Standard 7/8-14
- Recommended Shell Holder: RCBS #31 (sold separately)
- Country of Origin: USA
- Shipping Weight: 1.4 lbs
What’s Included
- Sizer Die with decapping unit
- Expander Die
- Seater Die with roll crimp
- Green RCBS die storage box
Frequently Asked Questions
Does the RCBS .50-95 die set come with a shell holder?
No, the shell holder is sold separately with this set. For the .50-95 Winchester Express you'll want RCBS Shell Holder #31. It's worth grabbing one at the same time so you're ready to load right out of the gate.
What rifles use the .50-95 Winchester Express cartridge?
The .50-95 was Winchester's largest chambering for the Model 1876 lever-action, introduced in 1879 for big and dangerous game. These dies suit original Model 1876 rifles as well as modern reproductions like the Uberti 1876. It's a straight-forward choice for anyone keeping a vintage or repro big-bore lever gun fed.
Can I form .50-95 brass from other cases with this set?
Many reloaders have had good results forming .50-95 brass from reworked .50-90 Sharps cases using these dies, which is handy since factory .50-95 brass is hard to come by. Results will depend on your starting brass and technique, but the dies are known for reforming cases cleanly without denting. Take it slow and lubricate well during sizing.
What kind of crimp does the seater die apply?
The seater die applies a roll crimp, which rolls the case mouth into the bullet's crimp groove. That's the right crimp for a tube-magazine lever gun like the Model 1876, since it helps hold the bullet in place against recoil. The expander die also adds a slight case-mouth flare so bullets start cleanly before seating.





Reviews
There are no reviews yet.