Description
The .45-70 Government is one of those cartridges that just about begs to be reloaded. Factory ammo runs expensive and gets scarce, and the big straight-wall case is forgiving and easy to work with once you have the right tools on the bench. This RCBS 3-Die Roll Crimp Set is built specifically for straight-wall rifle cartridges like the .45-70, and it covers every step of the process from prepping fired brass to crimping a finished round.
All three dies thread into any standard press using the common 7/8-14 thread, so it drops right into a Rock Chucker, Rebel, or pretty much any single-stage or turret press you already own. The set is made from hardened steel and ships in the familiar green RCBS box, made right here in the USA.
What Each Die in the RCBS .45-70 Set Does
The sizer die resizes the fired case back to spec and knocks out the spent primer with its decapping unit in one motion. Because this is a steel die and not carbide, you do need to lube your cases before running them through, since the .45-70 case has a slight taper and no carbide ring to ease the friction. The expander die opens the case mouth to the correct diameter and adds a little flare so the bullet starts cleanly without shaving lead or crumpling the brass. The seater die handles the last step, pressing the bullet to your chosen depth and applying a roll crimp into the cannelure to lock everything in place.
Getting the Most from This RCBS Die Set
The roll crimp is a real asset in the .45-70, especially for heavy loads in lever guns where recoil can jostle unsecured bullets in the magazine tube. A common tip from folks running this set is to back the seater off slightly and set seating depth first, then dial in the crimp separately so you are not fighting both adjustments at once. The set loads both cast and jacketed bullets with no trouble, making it a solid pick for hunting rounds, range plinking, or working up a favorite black powder style load.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 20904
- UPC: 076683209047
- Caliber: .45-70 Government
- Product Type: 3-Die Set
- Series: Group C
- Die Types: Sizer with Decapping Unit, Expander, Seater with Roll Crimp
- Die Material: Hardened Steel
- Thread: 7/8-14 Standard
- Intended Use: Straight-Wall Rifle Cartridges
- Case Lubrication: Required for Sizing
- Country of Origin: Made in USA
What’s Included
- Steel Sizer Die with Decapping Unit
- Expander Die
- Seater Die with Roll Crimp
- RCBS storage box
Frequently Asked Questions
Does the RCBS .45-70 3-Die Set come with a shell holder?
No, the shell holder is sold separately, which is standard for RCBS die sets. For the .45-70 Government you will want an RCBS #14 shell holder. Shell holders are largely interchangeable across brands on standard press rams, so a Lee, Hornady, or Lyman equivalent will also work in most setups.
Do I have to lube my brass with these dies?
Yes, case lubrication is required when sizing with this set. These are steel dies without a carbide ring, and the .45-70 case has a slight taper, so skipping lube can get a case stuck in the sizer. A thin, even coat of case lube before running brass through the sizer die is all you need.
Will this RCBS set load both cast and jacketed bullets?
It handles both without issue. Plenty of handloaders run this set for cast lead hunting and plinking loads as well as jacketed bullets. Just note that cast bullets typically use a larger diameter than jacketed, so set your expander and seating depth to match whichever you are loading.
Does this set fit a standard reloading press?
Yes. All three dies use the common 7/8-14 thread, so they thread into any standard single-stage or turret press, including the RCBS Rock Chucker and Rebel. If you already reload other cartridges, your current press will take these dies right away.




Reviews
There are no reviews yet.