0
0

RCBS 3-Die Roll Crimp Set .56-50 Spencer Legacy Series | 20104

UPC: 076683201041

$81.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Feeding a .56-50 Spencer isn't something you'll find pre-packaged on most shelves, which is exactly why this RCBS Legacy set earns its keep. Built for straight-wall cartridges, this three-die set covers the whole handloading sequence for one of the earliest successful American military metallic cartridges, the round developed for the Spencer repeating rifle and carbine during the Civil War era. If you shoot a reproduction Spencer or keep an original running, this is the tooling that gets you there.

What the .56-50 Spencer Legacy Set Does

The set works through three steps. The steel Sizer Die sizes the case and de-primes in one pass. The Expander Die opens the case mouth to the correct diameter to accept the bullet and adds a flare or bell so seating goes smoothly without shaving lead. The Seater Die then seats the bullet and applies a roll crimp to lock it in place, which matters on a tubular-magazine rifle where rounds sit nose to primer under spring tension. One note worth repeating from RCBS: cases must be lubricated before sizing on this set.

Fit and Setup for the RCBS Roll Crimp Set

These dies use the industry-standard 7/8-14 thread, so they'll thread right into nearly any single-stage or progressive press, RCBS or otherwise. The set calls for RCBS shell holder #31 (or Lyman #22), which is sold separately, so grab one if you don't already have it on the bench.

Made for a Historic Cartridge

The .56-50 is primarily of interest to black powder enthusiasts, collectors, and folks running reproduction Spencer rifles, and tooling for it isn't always easy to track down. RCBS machines these dies from proprietary steel in the USA, giving a cartridge with real history the quality dies it deserves. Pair it with proper brass, a shell holder, and good load data and you're set to keep a piece of American firearms history on the range.

Key Specifications

  • Manufacturer: RCBS
  • Series: Legacy
  • Caliber: .56-50 Spencer
  • Set Type: 3-Die Roll Crimp Set
  • Dies Included: Sizer/Decapping, Expander, Seater with Roll Crimp
  • Die Material: Steel
  • Thread: 7/8-14
  • Shell Holder: RCBS #31 or Lyman #22 (sold separately)
  • Cartridge Type: Straight-wall
  • Country of Origin: Made in USA
  • Manufacturer Part Number: 20104
  • UPC: 076683201041
  • Shipping Weight: 0.9 lb

What’s Included

  • Steel Sizer Die with decapping unit
  • Expander Die
  • Seater Die with roll crimp

Frequently Asked Questions

What does the RCBS .56-50 Spencer 3-die set include?

It comes with three dies: a steel Sizer Die that sizes the case and de-primes, an Expander Die that opens the case mouth and adds a flare for bullet seating, and a Seater Die that seats the bullet and applies a roll crimp. That covers the full handloading sequence for this straight-wall cartridge. A shell holder is not included and is sold separately.

Do I need to lubricate cases with this die set?

Yes. RCBS specifies that cases must be lubricated before sizing on this set. A light, even coat of case lube keeps the brass from sticking in the steel sizer and makes the whole process smoother.

Which shell holder works with the .56-50 Spencer Legacy set?

This set uses the RCBS #31 shell holder, or the Lyman #22 as an equivalent. The shell holder is sold separately, so pick one up if it's not already on your bench.

Will these dies fit my press?

They use the standard 7/8-14 thread, which fits nearly all single-stage and progressive presses from RCBS, Hornady, and most other major brands. If your press takes standard dies, this set will thread right in.

Additional information

UPC

076683201041

Manufacturer

Manufacturer Part Number

20104

Shipping Weight

0.9

Reviews

There are no reviews yet.

Be the first to review “RCBS 3-Die Roll Crimp Set .56-50 Spencer Legacy Series | 20104”