Description
The .44-40 Winchester is one of those classic old cowboy rounds that never really went away, and reloading it is the smart way to keep feeding your rifle or revolver. This RCBS 3-Die Roll Crimp Set (part number 18806) gives you everything needed to load straight-wall .44-40 brass from start to finish, and it's set up specifically for round nose jacketed bullets. The dies thread into any standard 7/8-14 press, so it drops right into whatever setup you're already running.
The set includes three dies, each doing its own job. The steel sizer die resizes the case back to spec and knocks out the spent primer in one pull. Since the sizer is steel rather than carbide, you'll want to run a little case lube before sizing to keep things moving smoothly and protect your brass. The expander die opens up the case mouth and puts a slight bell or flare on it so the bullet starts straight without shaving lead or crumpling the case. The seater die handles the last step, pressing the bullet to your chosen depth and rolling a crimp into the case mouth to lock it in place against recoil and feeding.
Why the 18806 Roll Crimp Set Fits .44-40 Reloaders
The roll crimp is a big deal with a cartridge like the .44-40. A solid crimp keeps bullets from walking under recoil in a lever gun or revolver and helps with consistent ignition. This particular set is tuned for Remington-style jacketed round nose bullets, so if that's what you're loading, the seater geometry matches up nicely.
What You Get With the RCBS 44-40 Die Set
RCBS has a long reputation among handloaders for building dies that hold tight tolerances and last for decades. These are machined and finished to the same standard as the rest of their lineup and made in the USA. They ship in the familiar green box and work great on both single-stage and progressive presses, making this a dependable choice whether you're loading for an old Winchester lever gun, a cowboy action revolver, or just enjoy keeping a piece of shooting history alive.
Key Specifications
- Manufacturer: RCBS
- Caliber: .44-40 Winchester (.44-40 WCF)
- Bullet Type: Round Nose Jacketed (Remington style)
- Die Set Type: 3-Die Roll Crimp Set (Group B)
- Number of Dies: 3
- Sizer Die Material: Steel (case lube required)
- Thread: 7/8-14 standard
- Crimp Style: Roll Crimp
- Manufacturer Part Number: 18806
- Model: 18806
- UPC: 076683188069
- Country of Origin: USA
- Shipping Weight: 1.5 lbs
What’s Included
- Steel sizer die with decapping unit
- Expander die
- Roll crimp seater die
- RCBS green storage box
Frequently Asked Questions
Does this RCBS .44-40 die set need case lube?
Yes. The sizer die in this set is made of steel rather than carbide, so you'll need to apply case lube before resizing. Skipping lube on a steel sizer can cause cases to stick, so give each case a light coat and you'll be fine.
What bullets is the 18806 seater die set up for?
This set is configured for round nose jacketed bullets, specifically the Remington-style .44-40 jacketed profile. If you load lead round nose bullets instead, RCBS offers a separate lead-specific set for that. Matching the seater to your bullet type gives you the cleanest seating and crimp.
Will these dies fit my reloading press?
Yes. The dies use the standard 7/8-14 thread, which fits virtually all common single-stage and progressive presses. You'll just need the correct shell holder for the .44-40 case, which is sold separately.
What does the roll crimp do on .44-40 loads?
The roll crimp folds the case mouth into the bullet's crimp groove to lock it in place. This keeps bullets from moving under recoil in lever guns and revolvers and promotes more consistent ignition. It's an important step for a cartridge like the .44-40 that gets used in tube-fed and revolver platforms.





Reviews
There are no reviews yet.