0
0

RCBS Carbide 3-Die Roll Crimp Set .44 Mag/.44 Special (18612)

UPC: 076683186126

$89.99

20 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading your own .44 Magnum or .44 Special, this RCBS carbide set covers the whole job from sizing to crimp. RCBS pioneered the 3-die setup for straight-wall pistol cases, and this one handles .44 Rem Mag, .44 S&W Special, and even .44 Russian brass since they share the same case body. Each die is machined from hardened, hand-polished steel and threaded in the industry-standard 7/8-14, so it drops right into nearly any single-stage or progressive press you already own.

What the RCBS 18612 Die Set Actually Does

The carbide sizer die is the star here. That tungsten carbide ring resizes the case and knocks out the spent primer in one stroke, and because carbide is so slick you skip the case lube entirely. No wiping brass down afterward, no stuck cases from a dry spot. The expander die opens the case mouth to the right diameter and adds a touch of bell so your bullet starts straight instead of shaving lead or crumpling the mouth. The seater die finishes things by pushing the bullet to depth and rolling the case mouth into the crimp groove.

Why the Roll Crimp Matters on This .44 Set

Roll crimp is the right call for revolver and lever-gun rounds. Under stout .44 Magnum recoil, bullets in the unfired chambers can walk forward and tie up a cylinder. A solid roll crimp into the cannelure locks them in place so the gun keeps running round after round. That's exactly why this set ships with a roll crimp seater rather than a taper crimp.

One thing worth knowing before you order: the shell holder is not included, so you'll want to grab the correct RCBS shell holder for the .44 case head separately if you don't already have one. Everything is made in the USA and backed by RCBS, which is about as proven as reloading gear gets.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 18612
  • Model: Carbide 3-Die Roll Crimp Set, Group B
  • UPC: 076683186126
  • Caliber: .44 Rem Magnum / .44 S&W Special / .44 Russian
  • Dies in Set: 3 (Sizer, Expander, Seater)
  • Crimp Type: Roll Crimp
  • Sizer Material: Tungsten Carbide (no case lube required)
  • Thread: Standard 7/8-14
  • Gun Type: Pistol / Revolver
  • Country of Origin: USA

What’s Included

  • Carbide sizer die with decapping unit
  • Expander (case mouth) die
  • Bullet seater die with roll crimp
  • Hex lock rings

Frequently Asked Questions

Do I need case lube with the RCBS 18612 carbide die set?

No. The carbide sizer ring resizes the brass without any lubrication, so you can skip the lube step entirely. Your cases also don't need to be cleaned before sizing. This saves time and keeps the whole process a lot less messy.

Does this set include a shell holder?

No, the shell holder is not included with this die set. You'll need to pick up the correct RCBS shell holder sized for the .44 case head separately. Many reloaders already have one on hand, but it's worth confirming before your first session.

Will this RCBS set work in presses other than RCBS?

Yes. These dies use the industry-standard 7/8-14 thread, which fits nearly all single-stage and progressive presses, including Hornady, Lee, Lyman, Redding, and Dillon. If your press takes standard dies, this set will thread right in.

Why does this .44 set use a roll crimp instead of a taper crimp?

Roll crimp is the proper choice for revolver and lever-gun cartridges with a crimp groove or cannelure. It locks the bullet into the case so it won't creep forward under heavy .44 Magnum recoil and tie up the cylinder. That reliability is exactly why RCBS set this one up with a roll crimp seater.

Additional information

UPC

076683186126

Manufacturer

Manufacturer Part Number

18612

Caliber/Gauge

.44 S&W Special

Length

6.0500

Model

Product Type

Carbide 3-Die Set

Shipping Weight

1.4375

Units per Box

1

Reviews

There are no reviews yet.

Be the first to review “RCBS Carbide 3-Die Roll Crimp Set .44 Mag/.44 Special (18612)”