Description
This RCBS Taper Crimp Seater Die handles two jobs at once. It seats your bullet to depth and gently squeezes the case mouth inward to form a taper crimp, all in a single pull of the handle. For anyone loading .38 Special or .357 Magnum with plated or lead bullets that don't have a cannelure or crimp groove, a taper crimp is often the better call than an aggressive roll crimp, and this die gives you that control in one station.
What the RCBS Group B Taper Crimp Die Brings to the Bench
Unlike a roll crimp that folds the case mouth into a bullet's groove, a taper crimp just snugs the mouth back against the bullet body. That makes it a favorite for lighter .38 loads and for jacketed or plated bullets where you want a clean, uniform finish without overworking the brass. Reloaders like that case length doesn't have to be perfect to the thousandth to get a consistent crimp, which is a real plus when you're running mixed headstamp brass or loading in volume. The crimp itself is machined right into the die body, so you dial it in by adjusting how far the die threads into your press, completely separate from the seating stem.
Build Quality You'd Expect From RCBS
Like the rest of the RCBS die lineup, this one is machined to tight tolerances, then hardened and hand finished. It uses the industry-standard 7/8-14 thread, so it fits single-stage and progressive presses right out of the box. The 18262 is sold as a die only, which is handy if you already have a sizing and expander setup and just want to add or swap in taper crimp seating for your revolver cartridges.
Feedback from folks who run this die is consistent: easy to set up, smooth in operation, and it does the work of seating and crimping together without fuss. If you've got non-cannelured bullets for your .38 or .357 and want tidy, repeatable ammo, this die earns its spot in the toolhead.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 18262
- UPC: 076683182623
- Die Type: Taper Crimp Seater Die (Die Only)
- Group: Group B
- Cartridges: .38 Special / .357 Magnum
- Thread Size: 7/8"-14
- Material: Hardened Steel, Hand Finished
- Shellholder Included: No
- Country of Origin: USA
- Shipping Weight: 0.7875 lbs
What’s Included
- RCBS Taper Crimp Seater Die (Group B, .38 Special/.357 Mag)
- Bullet seater plug
- Instructions
Frequently Asked Questions
What's the difference between this taper crimp die and a roll crimp seater for .38/.357?
A roll crimp folds the case mouth into a bullet's cannelure or crimp groove to lock it hard against recoil, which is the traditional choice for heavier revolver loads. A taper crimp just squeezes the case mouth back against the bullet body without rolling it over. This taper crimp version shines with plated or lead bullets that have no crimp groove, and it tends to be more forgiving of case length variation.
Can the RCBS 18262 die be used for both .38 Special and .357 Magnum?
Yes. This Group B die is set up for both .38 Special and .357 Magnum, since the two share the same bullet and case diameter. You just adjust seating depth to match whichever cartridge you're loading.
Does this die come with everything I need to start loading?
This is sold as a die only, meaning it includes the seater die body and bullet seater plug for seating and crimping. It does not include a sizing die, expander die, or a shellholder, so you'll want those already on hand to produce a finished round.
Will the RCBS taper crimp seater die fit my press?
It uses the standard 7/8"-14 thread found on virtually all modern single-stage and progressive presses, so it threads right in. The crimp is built into the die body and is set by how far you thread the die into the press, separate from the seating stem adjustment.





Reviews
There are no reviews yet.