0
0

RCBS 17601 Full-Length 2-Die Set .300 Rem. Ultra Mag

UPC: 076683176011

$52.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS 17601 is a two-die set built for anyone running the big .300 Remington Ultra Magnum and wanting to roll their own. This Group A set gives you everything needed to full-length size and seat bottleneck cases, which makes it a solid foundation whether you load a box a year for hunting season or run hundreds of rounds through the press.

The set pairs a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug and built-in roll crimper. The sizer brings your brass back down to SAAMI minimum cartridge dimensions, works the outside of the case, knocks out the spent primer, and expands the neck to grip the next bullet. Vent holes in the sizer let trapped air and excess lube escape, which keeps cases from getting dented during the stroke. Headspace is held to minimum tolerances so the case body length stays put through full-length sizing, and that translates to reliable chambering in a cartridge that already runs stout pressures.

What Sets the RCBS 17601 Apart

The die bodies are hardened and precision-drilled and reamed to the same exacting standards RCBS holds its finest tooling to. Fine body knurling gives you a non-slip grip for easy adjustment, and the three-piece expander-decapping unit locks in place so it won't slip mid-session. If you ever bend or break a decapping pin, swapping it out takes seconds.

Setting Up the RCBS .300 RUM Die Set

These dies use the standard 7/8-14 thread, so they drop right into any common single-stage or turret press. Keep in mind a shell holder is not included and gets picked up separately. For the .300 RUM you'll want shell holder #38. The seater die handles bullet seating depth and crimp in one motion, giving you consistent cartridge overall length round after round. RCBS has been turning out reloading gear for decades, and reloaders tend to keep these sets around and pass them down, which says plenty about how they hold up.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 17601
  • UPC: 076683176011
  • Caliber: .300 Rem. Ultra Mag (.300 RUM)
  • Product Type: Full-Length 2-Die Set
  • Series: Group A
  • Dies In Set: 2
  • Die Type: Sizer / Seater
  • Thread: 7/8-14 standard
  • Crimp Type: Built-in roll crimp
  • Shell Holder: #38 (sold separately)
  • Shipping Weight: 1.3 lbs

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug and roll crimper

Frequently Asked Questions

Does the RCBS 17601 die set come with a shell holder?

No, a shell holder is not included with this set and gets purchased separately. For the .300 Remington Ultra Magnum you'll want RCBS shell holder #38. It's a quick add and you'll need it to run the cases in your press.

Will the RCBS 17601 fit my press?

Yes, this set uses the standard 7/8-14 thread found on common single-stage, turret, and progressive presses. It threads right into any press built to that spec, which covers the vast majority out there. No adapters or special hardware needed.

What does the full-length sizer die do in this set?

The sizer works the outside of the case back down to SAAMI minimum dimensions while de-priming and expanding the neck to accept your next bullet. Vent holes let trapped air and extra lube escape so cases don't get dented. Full-length sizing like this helps brass chamber smoothly in any .300 RUM rifle.

Can I replace the decapping pin on the RCBS 17601?

Yes, the three-piece expander-decapping unit is designed so you can swap the decapping pin in seconds if it ever bends or breaks. The unit also locks in place to prevent slipping during use. It's a simple fix that keeps you loading without a trip to the parts bin.

Additional information

UPC

076683176011

Manufacturer

Manufacturer Part Number

17601

Caliber/Gauge

.300 RUM

Length

6

Product Type

Full Length Die Set

Shipping Weight

1.3

Reviews

There are no reviews yet.

Be the first to review “RCBS 17601 Full-Length 2-Die Set .300 Rem. Ultra Mag”