0
0

RCBS AR Series Small Base Taper Crimp Die Set .30-06 Springfield

UPC: 076683148070

$60.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run an M1 Garand or any semi-auto chambered in .30-06 Springfield, you already know standard full-length sizing doesn't always cut it. Gas guns slam brass into the chamber hard, and cases that fit fine in a bolt gun can hang up when the action does the work for you. This RCBS AR Series set is built to take that worry off the table with a small base sizer and a taper crimp seater working together.

What Makes the AR Series Small Base Sizer Different

The sizing die in this set works the case body and base down a few thousandths below standard full-length dimensions. That extra bump at the shoulder and body is the insurance policy that keeps your reloads chambering smoothly in tighter semi-auto chambers. It decaps and resizes in one pass, same as any full-length die, just with a little more squeeze where it counts. RCBS machines these dies from their own hardened steel, reams and polishes the interior, then hand-inspects each one before it ships.

The Taper Crimp Seater Die

The second die handles bullet seating and applies a taper crimp rather than a roll crimp. That matters on a rimless cartridge like the .30-06 that headspaces off the shoulder. A taper crimp keeps a firm, even grip on the bullet without biting into a cannelure, which helps rounds feed clean and holds the bullet steady against the recoil and feeding forces of an autoloader. If you're loading jacketed bullets without a cannelure, this is the crimp you want.

Built for Reliable Reloads

Reloaders who've leaned on RCBS gear for decades keep coming back for the consistency, and this set earns the same respect. It's a favorite for keeping Garands fed and running, and it plays nicely on single-stage and progressive presses alike. Keep in mind this is a two-die set and does not include a shell holder, so you'll want the correct one on hand. A little case lube goes a long way with small base sizing since you're pushing brass hard against that hardened steel.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 14807
  • UPC: 076683148070
  • Caliber: .30-06 Springfield
  • Projectile Caliber: .30 Caliber
  • Die Type: Rifle, 2-Die Set
  • Sizing Die: Small Base Sizer
  • Seating Die: Taper Crimp Seater
  • Crimp Style: 7-Degree Taper Crimp
  • Body Material: Hardened Steel
  • Best For: Semi-Auto and AR-Platform Rifles
  • Shipping Weight: 1.3625 lbs

What’s Included

  • Small Base Sizer Die
  • Taper Crimp Seater Die
  • Plastic storage box
  • Load data table

Frequently Asked Questions

What's the difference between this RCBS small base die set and a standard full-length set?

A standard full-length die returns brass to SAAMI minimum dimensions, which works fine in most bolt guns. This small base sizer takes the case body and base a few thousandths smaller than that, giving you extra clearance so rounds chamber without resistance in tighter semi-auto chambers. Think of it as the insurance policy when reliable feeding matters most.

Will this die set work for reloading .30-06 for an M1 Garand?

Yes, this is a popular choice for keeping Garands running. The small base sizing helps brass cycle reliably through the Garand's gas-operated action, and the taper crimp keeps a solid grip on the bullet during feeding. Just be sure to use well-lubed brass, since small base sizing pushes cases hard against the die.

Does the RCBS AR Series Small Base Die Set include a shell holder?

No, a shell holder is not included with this two-die set. You'll need to pick up the correct shell holder for .30-06 Springfield separately if you don't already have one on your bench. The set does come with a storage box and a load data table.

Can I use this taper crimp die for bullets with a cannelure?

This die applies a taper crimp, which is designed for straight jacketed bullets without a cannelure. It keeps an even grip on the bullet for reliable feeding in semi-autos. If you specifically want to crimp into a cannelure, you'd want a separate roll crimp die instead.

Additional information

UPC

076683148070

Manufacturer

Manufacturer Part Number

14807

Shipping Weight

1.3625

Reviews

There are no reviews yet.

Be the first to review “RCBS AR Series Small Base Taper Crimp Die Set .30-06 Springfield”