0
0

RCBS Full-Length 2-Die Set 7mm Rem Mag – 13601

UPC: 076683136015

$52.99

14 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading your own 7mm Remington Magnum, the RCBS Full-Length Die Set is about as proven as it gets. This is a two-die set made for bottleneck rifle brass, giving you a full-length sizer with an expander-decapping unit and a seater die with a bullet seater plug. It covers the core steps of resizing, de-priming, and bullet seating in one tidy package, and it threads into any standard single-stage or progressive press thanks to the universal 7/8-14 thread.

What the RCBS 7mm Rem Mag Dies Actually Do

The full-length sizer brings your fired cases back down to SAAMI minimum dimensions, so they chamber smoothly in any correctly cut rifle. As the case passes through, it sizes the outside, pushes out the spent primer, and expands the neck to grip your next bullet. The die body is vented to let trapped air and excess lube escape, which keeps you from denting case shoulders when you're cranking through a batch. Headspace is held to minimum tolerances, so the case body length stays where it should during sizing.

Seating and Crimping with the 13601 Die Set

The seater die carries a bullet seater plug and a built-in roll crimper, letting you set your seating depth and crimp in the same stroke. If you'd rather seat without crimping, just back the die off until the crimp ring clears the case mouth and seat in a separate step. RCBS dies are made from hardened steel with precision-drilled and reamed inner surfaces, plus hand-polished finishes that hold up to the abrasive wear that comes with sizing year after year. The large hex lock rings make dialing in your settings quick and keep them locked once you've got them right.

For anyone feeding a 7mm Rem Mag for long-range target work or hunting out West, these dies are a dependable foundation. Note that this set uses RCBS Shell Holder #4, which is sold separately if you don't already have one on the bench.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 13601
  • UPC: 076683136015
  • Caliber: 7mm Remington Magnum
  • Product Type: Full-Length Die Set
  • Dies in Set: 2
  • Die Series: Group A
  • Thread Size: 7/8-14 Standard
  • Shell Holder: RCBS #4 (sold separately)
  • Material: Hardened Steel
  • Length: 6.1 in
  • Shipping Weight: 1.26 lbs
  • Country of Origin: USA

What’s Included

  • Full-Length Sizer Die with expander-decapping unit
  • Seater Die with bullet seater plug and built-in roll crimper

Frequently Asked Questions

What shell holder do I need for the RCBS 7mm Rem Mag die set?

This set uses the RCBS Shell Holder #4. It does not come with the dies, so you'll want to grab one separately if it's not already in your kit. The same holder works across a number of popular magnum cartridges that share the belted case head.

Will the RCBS 13601 dies fit my press?

Yes. These dies use the standard 7/8-14 thread, which fits virtually all single-stage and progressive reloading presses on the market. If your press takes common dies, you're good to go.

Can I seat bullets without crimping using this die set?

You can. The seater die has a built-in roll crimper, but you can skip the crimp by backing the die off until the crimp ring no longer contacts the case mouth. That lets you seat to your desired depth and crimp as a separate step if you prefer.

What does the full-length sizer do compared to neck sizing?

The full-length sizer resizes the entire case back down to SAAMI minimum dimensions, de-primes it, and expands the neck in one pass. This gives you reliable chambering in any correctly cut 7mm Rem Mag rifle, which is especially handy if you shoot the same brass across multiple guns or want consistent feeding.

Additional information

UPC

076683136015

Manufacturer

Manufacturer Part Number

13601

Caliber/Gauge

7mm Remington Magnum

Length

6.1000

Product Type

Full Length Die Set

Shipping Weight

1.2625

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length 2-Die Set 7mm Rem Mag – 13601”