Description
The RCBS 12701 covers everything you need to full-length size and seat for the .264 Winchester Magnum, one of those flat-shooting belted magnums that practically begs you to roll your own. This is RCBS's Group A set for popular rifle cartridges, and it carries the same reputation the brand has earned over decades of churning out dependable gear. The sizer die handles the outside of the case, kicks out the spent primer, and expands the neck so it's ready to take a new bullet, while the seater die sets bullet depth and includes a built-in roll crimp if you want it.
What the RCBS 12701 .264 Win Mag Dies Actually Do
The full-length sizer brings fired brass back to SAAMI minimum dimensions, which is exactly what you want if you're running the same brass through multiple rifles or just chasing reliable chambering. Vent holes in the sizer let trapped air and excess lube escape, so you avoid the dented shoulders and stuck cases that come from pressure buildup. Headspace is held to tight tolerances to keep from stretching the case body during sizing, and the expander-decapping assembly stays centered thanks to a non-slip collet. The bodies wear wrench flats and knurling for grip, and the steel hex lock rings use set screws to hold your adjustments once you've dialed them in.
Seating and Crimping with the 12701 Seater Die
The seater die comes with a bullet seater plug and a built-in roll crimper sized for the cartridge. You can crimp as you seat, or back the crimp off entirely and seat without it, which is how most folks loading for a bolt gun prefer to run things. Both dies use the industry-standard 7/8-14 thread, so they'll thread right into any standard single-stage or turret press you've already got on the bench.
Built the RCBS Way
These are made in America and hand inspected before they ship out in the familiar green RCBS box. The dies are machined from hardened steel and hand polished, the kind of tooling that holds up load after load. One thing worth knowing up front: the shellholder is sold separately, and this cartridge uses the RCBS Shell Holder #4.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 12701
- Model: 12701
- UPC: 076683127013
- Caliber: .264 Winchester Magnum
- Product Type: Full-Length 2-Die Set
- Die Group: Group A
- Dies Included: Full-Length Sizer, Bullet Seater
- Thread Size: 7/8-14
- Material: Hardened Steel
- Required Shell Holder: RCBS #4 (sold separately)
- Crimp Type: Built-in Roll Crimp
- Country of Origin: Made in USA
- Shipping Weight: 1.3 lbs
What’s Included
- Full-Length Sizer Die with expander/decapping unit
- Bullet Seater Die with seater plug and built-in roll crimper
- Storage box
- Instructions
Frequently Asked Questions
What shell holder do I need for the RCBS 12701 .264 Win Mag die set?
This set uses the RCBS Shell Holder #4. It is not included with the dies, so you'll want to grab one separately if you don't already have it on the bench.
Are these RCBS .264 Winchester Magnum dies steel or carbide?
These are hardened steel dies, hand polished at the factory. Since bottleneck rifle cases like the .264 Win Mag require lubrication before sizing anyway, steel sizer dies are the standard choice for this type of cartridge.
Will the RCBS 12701 dies fit my press?
Yes. They use the industry-standard 7/8-14 thread, so they thread into any standard single-stage or turret reloading press on the market.
Does the seater die crimp the bullet?
The seater has a built-in roll crimper sized for the cartridge, so you can crimp while seating if you want. You can also back it off and seat without crimping, which is common for bolt-action loads where crimping isn't necessary.




Reviews
There are no reviews yet.