Description
If you're loading .25-06 Remington, this RCBS Group A two-die set covers the two jobs that matter most: sizing your brass back into shape and seating bullets with consistency you can count on. It's built for bottleneck rifle cases and includes a full-length sizer die with an expander-decapping unit plus a seater die with a bullet seater plug. RCBS has been turning out dies like these for decades, and the fit and finish is exactly what longtime reloaders expect from the brand.
What the RCBS .25-06 Sizer Die Handles
The full-length sizer die brings your fired cases back to SAAMI minimum cartridge dimensions. In one stroke it sizes the outside of the case, knocks out the spent primer, and expands the neck so it's ready to accept a bullet. The die body is vented to prevent case damage from trapped air or excess lubricant, which is one of those small details that saves you from dented shoulders down the road. Headspace is held to minimum tolerances so the case body length stays where it should during full-length sizing.
Seating and Crimping with the 12001 Die Set
The seater die uses a bullet seater plug for consistent seating depth, and it has a built-in roll crimper so you can crimp the case mouth as the bullet seats if your load calls for it. That flexibility is handy whether you're loading hunting rounds that benefit from a crimp or working up a precision load where you'd leave the crimp out. Both dies use the standard 7/8-inch-14 thread, so this set threads right into just about any single-stage or turret press on the market.
Rounding Out Your .25-06 Reloading Setup
Keep in mind a shell holder is not included, so you'll want to grab the correct one for the .25-06 Rem case head if you don't already have it on your bench. Pair these dies with quality brass, bullets, powder, and primers, and this set will serve as the backbone of your .25-06 loading for years. It's a straightforward, dependable choice for building accurate ammo for one of the great flat-shooting quarter-bore cartridges.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 12001
- UPC: 076683120014
- Caliber: .25-06 Remington
- Product Type: Full-Length 2-Die Set
- Series: Group A
- Dies In Set: 2
- Die Thread: 7/8-inch-14
- Case Type: Bottleneck rifle
- Includes: Full-length sizer die and seater die
What’s Included
- Full-length sizer die with expander-decapping unit
- Seater die with bullet seater plug and built-in roll crimper
Frequently Asked Questions
Does the RCBS .25-06 die set come with a shell holder?
No, a shell holder is not included with this set. You'll need to buy the correct RCBS shell holder for the .25-06 Remington case head separately, or use one you already have that fits. Match the shell holder to the case head and you're good to go.
Will this RCBS 12001 die set fit my reloading press?
Both dies use the standard 7/8-inch-14 thread, which is the industry-standard sizing. That means this set threads into virtually any single-stage or turret press on the market. If your press accepts common dies, these will drop right in.
What's included in this two-die set?
You get a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer resizes the case, de-primes it, and expands the neck in one pass, while the seater sets bullet depth. It covers the core sizing and seating steps for loading .25-06 Rem.
Can I crimp with the RCBS .25-06 seater die?
Yes, the seater die has a built-in roll crimper that can crimp the case mouth at the same time the bullet is seated. You can set it to crimp for loads that benefit from it, like hunting rounds, or back it off to seat without crimping. The choice is yours depending on your load.





Reviews
There are no reviews yet.