Description
If you're loading for the 6mm Remington, this RCBS Group A two-die set covers the two jobs that matter most on a bottleneck rifle case: bringing fired brass back to shape and seating your bullets cleanly. It's a classic full-length setup that's been trusted by handloaders for decades, and the 6mm Rem is one of those flat-shooting, hard-hitting cartridges that really rewards careful reloading.
What the RCBS 6mm Rem Die Set Actually Does
The set pairs a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer works the outside of the case back down to SAAMI minimum dimensions, punches out the spent primer, and expands the neck in one stroke so it's ready to take a new bullet. Vent holes in the sizer let trapped air and extra lube escape, which keeps you from denting shoulders or sticking a case. Headspace is held to tight tolerances so you're not stretching the case body every time you run the press.
Seating and Crimping with the 6mm Remington Dies
The seater die comes with a built-in roll crimper, so you can seat the bullet and apply crimp in the same motion if your load calls for it. That's handy for anyone running a tube magazine or a semi-auto like the old 742 that benefits from a firm bullet hold. Dial the seater plug in to your preferred overall length and you'll get consistent, repeatable rounds batch after batch.
These dies use the standard 7/8-14 thread, so they'll thread right into any common single-stage or turret press. One thing worth knowing before you get started: you'll need a #3 shell holder, which is sold separately. RCBS gear has a long-standing reputation for fit and finish, and their lifetime warranty means if anything ever goes wrong, they'll make it right. For folks breathing new life into a 6mm Rem rifle, this is a solid, proven foundation to build your loads on.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 11501
- UPC: 076683115010
- Caliber: 6mm Rem
- Series: Group A
- Product Type: Full-Length Die Set
- Dies in Set: 2
- Die Type: Sizer / Seater
- Thread Size: 7/8-14 TPI
- Carbide: No
- Shell Holder: #3 (sold separately)
- Intended Use: Bottleneck rifle cases
What’s Included
- Full-length sizer die with expander-decapping unit
- Seater die with bullet seater plug and built-in roll crimper
Frequently Asked Questions
Does the RCBS 6mm Rem die set come with a shell holder?
No, the shell holder is not included with this set. You'll need a #3 shell holder, which is sold separately. It's a common part, so it's easy to pick up alongside the dies.
Will these dies fit my reloading press?
Yes. This set uses the standard 7/8-14 thread, which is the industry standard for rifle dies. That means it threads right into virtually any common single-stage, turret, or progressive press.
Can this set both size and crimp 6mm Remington cases?
It can. The full-length sizer brings your fired brass back to SAAMI minimum dimensions while de-priming and expanding the neck. The seater die includes a built-in roll crimper, so you can crimp the bullet in the same stroke as seating if your load calls for it.
Are these carbide dies?
No, this is a standard steel die set, not carbide. Like most bottleneck rifle dies, it requires case lubrication before full-length sizing to prevent stuck cases and keep things running smoothly.




Reviews
There are no reviews yet.