0
0

RCBS Small Base 2-Die Set .243 Winchester – Group A (11403)

UPC: 076683114037

$48.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading .243 Winchester for a gas gun, pump, or lever-action rifle, a standard full-length die sometimes leaves brass just a touch too plump at the base to feed and chamber reliably. That's exactly where this RCBS Small Base 2-Die Set earns its keep. The sizer works the case body and shoulder a few thousandths below SAAMI minimum dimensions, giving you that extra clearance tight chambers and fast-cycling actions appreciate. It also de-primes the case in the same stroke, so you're sizing and decapping in one pull of the handle.

What the RCBS Small Base Group A Set Does Differently

The difference here is all about the base of the case. A regular full-length die squeezes the body down to standard specs, but a small base die goes a hair further where the brass sits in the chamber. For autoloaders and manually operated actions that slam brass home hard, that little bit of extra sizing is the difference between smooth feeding and a round that hangs up. Keep in mind this set is purpose-built for those tight-chambering rifles and isn't the pick for a bolt gun, where over-working brass just shortens case life.

Inside the .243 Winchester Small Base Die Set

You get two dies machined and finished to RCBS's usual standard. The Small Base Sizer carries an expander-decapping unit that pops the spent primer and opens the case mouth for easy bullet seating. The Regular Seater Die includes a seater plug and a built-in roll crimper, so you can crimp and seat in one motion or back the die off until the crimp ring clears the case mouth if you'd rather seat without a crimp. Both dies use the standard 7/8 x 14 thread, so they'll thread into any common single-stage or turret press.

One real-world tip: because a small base die works the brass harder than a standard die, be generous with good case lube. Skimping is the fastest way to stick a case. This set uses RCBS Shell Holder #3, which is sold separately if you don't already have one on the bench.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 11403
  • UPC: 076683114037
  • Caliber: .243 Winchester
  • Product Type: Small Base 2-Die Set
  • Series: Group A
  • Number of Dies: 2
  • Thread Size: 7/8 x 14
  • Shell Holder: RCBS #3 (sold separately)
  • Material: Hardened, hand-polished steel
  • Recommended For: Semi-automatic, pump, and lever-action rifles
  • Shipping Weight: 1.17 lbs

What’s Included

  • Small Base Sizer Die with Expander-Decapping Unit
  • Regular Seater Die with Seater Plug and roll crimper

Frequently Asked Questions

What's the difference between this RCBS Small Base die and a regular full-length die?

A standard full-length die sizes the case body back to normal specs, while this small base die sizes the base and shoulder a few thousandths below SAAMI minimums. That extra bit of clearance helps rounds feed and chamber reliably in tight or fast-cycling actions. It's the right tool when a regular die leaves brass just a touch too tight.

Should I use this Small Base Die Set for my bolt-action .243?

This set is built for semi-automatic, pump, and lever-action rifles that chamber brass tightly. For a bolt gun it isn't the ideal choice, since working the base down below minimum specs tends to over-size brass and shorten case life. A standard full-length or neck die is usually the better fit for a bolt action.

Does the RCBS Small Base Group A set come with a shell holder?

No, the shell holder is sold separately. For .243 Winchester you'll want the RCBS Shell Holder #3. If you already load similar cartridges, there's a good chance you have one on the bench.

Can I seat bullets without crimping using this die set?

Yes. The seater die has a built-in roll crimper, but you can simply back the die off until the crimp ring no longer engages the case mouth. That lets you seat bullets without applying a crimp whenever you prefer. Just remember to use plenty of quality case lube when sizing, since small base dies work the brass harder than standard dies.

Additional information

UPC

076683114037

Manufacturer

Manufacturer Part Number

11403

Caliber/Gauge

.243 Winchester

Length

6

Product Type

SMALL BASE

Shipping Weight

1.1688

Reviews

There are no reviews yet.

Be the first to review “RCBS Small Base 2-Die Set .243 Winchester – Group A (11403)”