0
0

RCBS Small Base Die Set .223 Remington 2-Die Set – MPN 11103

UPC: 076683111036

$54.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever had a reload hang up on the way into the chamber or leave your bolt stopping just short of battery, this is the set that solves it. The RCBS Small Base Die Set in .223 Remington is purpose-built for gas guns and other tight-chambering actions, and it's one of the most dependable ways to keep your handloads cycling the way they should.

This two-die package covers both ends of the job. The sizer resizes fired brass a few thousandths below standard specs, trimming down the shoulder and body so cases drop in clean every time, and it de-primes at the same time thanks to the expander-decapping unit. The seater die sets your bullet to depth and carries a built-in roll crimper if you want to lock the bullet in place during the same stroke. Prefer no crimp? Just back the die out until the crimp ring clears the case mouth and you're seating only. Both dies are machined from hardened steel and finished to hold up against the wear that comes with resizing year after year.

Why the RCBS .223 Small Base Dies Earn Their Keep

Small base sizing is the trick for brass headed into AR-pattern rifles, pump actions, and semi-autos where a standard full-length die sometimes leaves cases a hair too tight. Reloaders who have fought feeding gremlins in their builds tend to point straight at a small base die as the fix. One thing worth remembering: because these dies work the brass harder than a standard sizer, a good coat of quality case lube goes a long way toward preventing stuck cases.

Fitting the 11103 Dies to Your Press

These use the standard 7/8"-14 thread, so they'll thread into just about any single-stage or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and the rest. The shell holder is not included, so grab the correct one for the .223/5.56 case head if you don't already have it in your kit. Made in the USA and backed by the RCBS reputation, this set is a smart pickup for anyone loading .223 Rem or 5.56 NATO brass for an action that demands reliable chambering.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 11103
  • UPC: 076683111036
  • Caliber: .223 Remington / 5.56 NATO
  • Die Type: Small Base, Full-Length Sizer and Seater
  • Number of Dies: 2
  • Series: Group A
  • Thread: Standard 7/8"-14
  • Material: Hardened Steel
  • Crimp Style: Roll Crimp (built into seater die)
  • Country of Origin: United States

What’s Included

  • Small Base Sizer Die with Expander-Decapping Unit
  • Regular Seater Die with Seater Plug

Frequently Asked Questions

What's the difference between the RCBS small base die set and a standard full-length set?

The small base sizer resizes the case body and shoulder a few thousandths below standard SAAMI minimums, which is more aggressive than a regular full-length die. That extra reduction near the case head is what helps reloads chamber and feed reliably in semi-auto, pump, and lever-action rifles. For a bolt gun you generally don't need a small base die, but for a gas gun it can be the fix for feeding problems.

Does the RCBS 11103 set come with a shell holder?

No, the shell holder is not included with this set. You'll need to pick up the correct shell holder for the .223 Remington / 5.56 case head separately. Make sure you match the right size so you don't risk pulling a rim or getting a case stuck.

Will these dies work in my press if it isn't an RCBS press?

Yes. The set uses the industry-standard 7/8"-14 thread, so it threads into nearly every single-stage and progressive press on the market, including Hornady, Lee, Lyman, Redding, and Dillon. That thread standard is universal across the reloading world.

Do I really need extra case lube with the small base sizer?

It's strongly recommended. Because the small base die works the brass harder than a standard sizer, going light on lube is the fastest way to get a case stuck. A good, even coat of quality case lube keeps sizing smooth and your brass moving in and out without drama.

Additional information

UPC

076683111036

Manufacturer

Manufacturer Part Number

11103

Caliber/Gauge

.223 REM/5.56 NATO

Length

5.9500

Product Type

SMALL BASE

Shipping Weight

1.1563

Reviews

There are no reviews yet.

Be the first to review “RCBS Small Base Die Set .223 Remington 2-Die Set – MPN 11103”