Description
The RCBS 11001 is a full-length two-die set built specifically for the .222 Remington Magnum, one of those classic varmint and bench cartridges that rewards careful handloading. If you want reloads that match the accuracy your rifle is capable of, this is the kind of gear that gets you there. RCBS machines these from their own proprietary die steel, and anyone who has run their dies for a season or two knows they hold up and keep producing consistent results load after load.
This set covers the two jobs that matter most for bottleneck brass. The full-length sizer die resizes the outside of the case, knocks out the spent primer, and expands the neck so it's ready to take a bullet. It brings fired cases back to SAAMI minimum dimensions, and the headspace is held to tight tolerances so you're not inadvertently stretching the case body during sizing. Vent holes in the sizer let trapped air and extra lube escape, which keeps you from denting a shoulder when you least expect it.
What the RCBS 11001 Die Set Brings to the Bench
The seater die has a built-in roll crimper, so you can seat the bullet and apply crimp in the same stroke if your load calls for it. The large hex-lock rings make setup quick and let you lock in your adjustments without a wrench fight. Everything ships in the familiar green RCBS plastic storage box along with a loading data table, so your dies stay organized and protected between sessions.
Setting Up Your .222 Rem Mag Two-Die Set
One thing worth knowing before you start: this set uses the RCBS #10 shell holder, which is sold separately. If you're already loading other cartridges in the same family you may have one on hand, but it's worth checking before your first session so you're not stuck mid-setup. Pair it with your press, some quality brass, and good load data, and you'll be turning out .222 Rem Mag ammo that's accurate, repeatable, and ready for the field.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 11001
- UPC: 076683110015
- Caliber: .222 Remington Magnum
- Die Set Type: Full-Length 2-Die Set (Group A)
- Case Type: Bottleneck rifle cases
- Thread Size: 7/8"-14
- Material: Proprietary die steel
- Shell Holder: #10 (sold separately)
- Crimp Type: Built-in roll crimp
- Country of Origin: United States
What’s Included
- Full-length sizer die with expander-decapping unit
- Seater die with bullet seater plug and built-in roll crimper
- Plastic storage box
- Loading data table
Frequently Asked Questions
Which shell holder does the RCBS 11001 .222 Rem Mag die set need?
This set uses the RCBS #10 shell holder, and it is sold separately. It is not included in the box, so grab one before your first loading session if you don't already have it on hand. Without the correct shell holder, your press won't hold the case for sizing or seating.
Does the seater die in this RCBS set crimp the bullet?
Yes. The seater die has a built-in roll crimper, which lets you seat the bullet and apply crimp in the same stroke. You can also back the crimp off and seat without crimping if your load doesn't call for it. It gives you flexibility depending on how you're loading.
Will this RCBS die set work with standard reloading presses?
It will. These dies use the standard 7/8"-14 thread, so they thread right into common single-stage and turret presses from RCBS and other major brands. That standard sizing also means they're compatible with a wide range of accessories.
What does the full-length sizer die actually do?
The full-length sizer resizes the outside of the case back toward SAAMI minimum dimensions, deprimes the spent primer, and expands the neck to accept a new bullet. It also has vent holes to let trapped air and excess lube escape, which helps prevent dented shoulders. Full-length sizing is a solid choice when you want your reloads to chamber reliably across different rifles.





Reviews
There are no reviews yet.