0
0

RCBS Full-Length 2-Die Set .204 Ruger (Group A) – 10301

UPC: 076683103017

$52.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you shoot the .204 Ruger, you already know the little speedster rewards consistent brass, and that is exactly what this RCBS Group A two-die set is built to give you. It covers the two steps every bottleneck reload needs: full-length sizing and bullet seating. The sizer die brings fired cases back down to SAAMI minimum dimensions, de-primes, and expands the neck so it is ready to accept a new bullet, while the seater handles placement and crimp. RCBS cuts these dies to a tolerance roughly twice as tight as typical factory ammo, which is a big part of why handloads from this set drop into the chamber and extract without a fuss.

What the RCBS .204 Ruger Die Set Does on the Press

The full-length sizer carries an expander-decapping unit that knocks out the spent primer and sizes the neck in one stroke. It also has vent holes machined into the body, which let trapped air and excess case lube escape so you avoid dented shoulders and stuck brass. The expander-decapping assembly locks in place to prevent slippage, and the three-piece design lets you swap a bent or broken decapping pin in seconds instead of ordering a whole new rod.

Build and Fitment of the 10301 Die Set

Both dies are machined from RCBS proprietary, hardened die steel and finished with fine body knurling so you can adjust them by hand without a wrench or slipping. They use the standard 7/8-14 thread, so they'll thread right into any common single-stage or turret press. The seater die includes a bullet seater plug and a built-in crimp suited to the cartridge, giving you clean, repeatable seating depth once you dial it in.

Getting the Most Out of This .204 Ruger Reloading Set

Reloaders consistently rank RCBS dies up near the premium brands for smoothness and finish without the premium sticker, and this set keeps that reputation going. Keep in mind the shell holder is sold separately, so grab a .204 Ruger shell holder if you don't already have one on the bench. Add a good case lube and you've got everything you need to start turning fired brass into match-ready ammo.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 10301
  • Model: 10301
  • UPC: 076683103017
  • Caliber: .204 Ruger
  • Product Type: Full-Length 2-Die Set (Group A)
  • Case Type: Bottleneck Rifle
  • Dies Included: Full-Length Sizer Die, Bullet Seater Die
  • Thread: 7/8-14 (standard)
  • Material: Hardened Proprietary Die Steel
  • Finish: Fine Body Knurling
  • Sizing: SAAMI Minimum Cartridge Dimensions
  • Shipping Weight: 1.15 lbs

What’s Included

  • Full-Length Sizer Die with expander-decapping unit
  • Bullet Seater Die with seater plug and built-in crimp

Frequently Asked Questions

Does the RCBS .204 Ruger die set come with a shell holder?

No, the shell holder is sold separately on this set. You'll want to pick up a .204 Ruger shell holder that matches your press ram before your first session. It's a cheap add-on and a lot of reloaders already have the right one on hand.

Will this die set fit my press?

Yes, both dies use the standard 7/8-14 thread, so they'll thread into any common single-stage or turret press. That covers the vast majority of presses on the market. No adapters or special hardware needed.

What exactly does the full-length sizer die do?

It resizes the entire fired case back to SAAMI minimum dimensions, removes the spent primer, and expands the case neck to accept a new bullet, all in one stroke. The die body is vented to let trapped air and excess lube escape, which helps prevent dented shoulders and stuck cases. Full-length sizing is the go-to choice if you shoot the same brass across more than one rifle or want reliable chambering.

Is this a two-die or three-die set?

This is a two-die set, which is the standard setup for bottleneck rifle cartridges like the .204 Ruger. You get a full-length sizer and a bullet seater. There's no separate taper crimp die, but the seater has a built-in crimp appropriate for the cartridge.

Additional information

UPC

076683103017

Manufacturer

Manufacturer Part Number

10301

Caliber/Gauge

.204 Ruger

Length

6

Product Type

Full Length Die Set

Shipping Weight

1.15

Reviews

There are no reviews yet.

Be the first to review “RCBS Full-Length 2-Die Set .204 Ruger (Group A) – 10301”