Description
Every reloader eventually loads a round they wish they hadn't, whether it's the wrong powder, a questionable charge, or a batch that got damp in storage. The RCBS 9426 Bullet Puller Collet is how you take those cartridges apart and get your components back. It's a .30 caliber (7.35mm) collet sized for .308 diameter bullets, which covers the usual suspects like 30-30, 30-06, 308 Winchester, and 303 British.
The collet itself is the business end of the system. You thread the RCBS Standard Bullet Puller body into your press, drop this collet in to match your caliber, raise the ram to seat the cartridge, tighten the collet down onto the bullet, then lower the ram to draw the bullet free. RCBS redesigned this collet to grip jacketed bullets firmly without chewing up the bullet or the case neck, so both parts come out reusable.
How the 9426 Collet Fits Your Bench
This is a collet only, not the complete puller, so you'll need the RCBS Standard Bullet Puller body to use it. The good news is the puller body uses standard 7/8-14 threads, which means it screws into just about any single-stage press on the market. If you reload across several calibers, the system is built around swapping collets, so one puller body handles your whole lineup.
What Makes the .30 Cal Collet Worth Keeping Around
Reloaders who've used it consistently point to clean, no-damage pulls, with the bullet coming out straight and the brass unharmed. It's a simple steel part with a silver finish and no moving pieces to wear out, which is exactly what you want in a tool that sits in a drawer until you need it. When that day comes, having the right caliber collet on hand saves a batch of ammo and the money tied up in those components. For anyone loading .308 diameter rounds, it's a small insurance policy against a bad loading session.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9426
- UPC: 076683094261
- Product Type: Bullet Puller Collet
- Caliber: .30 Cal / 7.35mm (.308 Diameter)
- Compatible With: RCBS Standard Bullet Puller
- Thread: 7/8-14 (on puller body)
- Material: Steel
- Finish: Silver
- Length: 2.7 in
- Quantity: 1
What’s Included
- RCBS 9426 Bullet Puller Collet, .30 Cal / 7.35mm (1)
Frequently Asked Questions
Does the RCBS 9426 collet include the bullet puller itself?
No. The 9426 is the caliber-specific collet only. You'll need the separate RCBS Standard Bullet Puller body for it to work, and the collet drops into that body to match your .30 caliber rounds.
What cartridges does the .30 Cal collet work with?
It's sized for .30 caliber, 7.35mm, and .308 diameter bullets. That covers common rounds like 30-30, 30-06, 308 Winchester, and 303 British. As long as your bullet is .308 diameter, this is the collet you want.
Will it damage my bullets or brass when I pull them?
The collet is designed to grip jacketed bullets firmly without marring the bullet or the case. Reloaders consistently report clean pulls with both the bullet and brass coming out reusable, which is the whole point of a collet-style puller.
Will the RCBS bullet puller fit my press?
The puller body that holds this collet uses standard 7/8-14 threads, so it fits nearly every single-stage reloading press out there. If your press takes standard dies, you're good to go.




Reviews
There are no reviews yet.