Description
When a load doesn't come out right, or you just need to break down a batch of rounds, this is the piece that actually grabs the bullet. The RCBS 9422 Standard Bullet Puller Collet is sized for .25 caliber projectiles, including .257 Roberts, 25-06, .250 Savage, and .257 Weatherby. It seats inside the RCBS Standard Bullet Puller body (sold separately) and clamps down on the bullet, then you lower the press ram to draw the case away and leave the bullet behind in one piece.
How the 9422 Collet Pulls Bullets
The RCBS collet works a lot like a draw collet on a lathe. As the lever on top of the puller body is turned, the collet tightens around the bullet nose, locking it in place before the press handle pulls the case down and off. It's a precise, clean method that's gentle on jacketed and monolithic bullets, which makes it a favorite for anyone pulling more than a handful of rounds at a time. This collet is machined from hardened steel with a gray finish, so it holds its grip over years of bench use.
What the RCBS 9422 Fits
This is a caliber-specific collet, meaning the 9422 covers the .25 family of cartridges and you'd grab a different collet for other bullet diameters. It pairs with the RCBS Standard Bullet Puller body, which threads into any single-stage reloading press using the standard 7/8-14 thread. One thing worth knowing: collet-style pullers are built for jacketed, plated, and all-copper bullets. Soft cast lead projectiles can get distorted and don't grip well, so a kinetic hammer puller is the better call for those.
Why Reloaders Keep One on the Bench
Compared to the hammer-and-pound method, the collet setup is faster and a lot less work when you've got volume to run. Feedback from reloaders is consistent on this: it pulls bullets quicker than the inertia type and does it without the arm workout. Keep the right collets on hand and you can correct a bad charge, swap components, or reclaim bullets any time you need to.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9422
- UPC: 076683094223
- Caliber: .25 Caliber / .257 Roberts
- Product Type: Bullet Puller Collet
- Material: Hardened Steel
- Finish: Gray
- Color: Silver
- Size: Standard
- Function: Pull Bullets
- Compatible With: RCBS Standard Bullet Puller (7/8-14 thread)
- Length: 2.3 in
- Quantity: 1
What’s Included
- RCBS 9422 .25 Caliber Bullet Puller Collet (1)
Frequently Asked Questions
What does the RCBS 9422 bullet puller collet fit?
This collet is sized for the .25 caliber family, which covers cartridges like .257 Roberts, 25-06, .250 Savage, and .257 Weatherby. It's designed to drop into the RCBS Standard Bullet Puller body, which is sold separately. If you load other calibers, you'll want the matching collet for each bullet diameter.
Do I need anything else to use this collet?
Yes. The collet itself just grips the bullet, so you'll need the RCBS Standard Bullet Puller body, which threads into your press with a standard 7/8-14 thread. That body works in any single-stage reloading press using that thread size.
Will the RCBS collet puller damage my bullets?
It's built to grip and pull jacketed, plated, and monolithic bullets without distorting them. You may see very small marks where the collet clamps, which is normal for collet-style pullers, but the bullet stays usable. For soft cast lead bullets, a kinetic hammer puller is the better choice since the collet can deform them.
Is a collet puller better than a kinetic hammer puller?
It depends on volume. The collet setup is faster and far less tiring when you've got a lot of rounds to break down, which is why reloaders reach for it on bigger jobs. A kinetic puller is handy for a few rounds or for soft lead bullets that don't work with a collet.




Reviews
There are no reviews yet.