Description
A case trimmer is only as good as the thing holding the brass, and that is exactly the job the RCBS Case Trimmer Collet #3 handles. It works like a draw collet on a lathe, clamping the case head square and tight so the cutter sees the same reference point on every piece of brass. When the case is held straight, the trimmer stops chasing runout and your lengths come out consistent batch after batch, which is the whole point of measuring and trimming in the first place.
What the #3 Collet Fits
This one is sized for a specific group of case heads, and it covers a surprising amount of ground. The #3 works with calibers like 22 Bench Rest, 22 PPC, 22 Remington Jet, 6mm Bench Rest, 6mm PPC, 30 M1 Carbine, 30-40 Krag, 7.62×39, 357 Magnum, 357 Maximum, 357 Sig, 38 S&W, 38 Special, 40 S&W, 405 Winchester, and 10mm Auto. If you load a mix of pistol and smaller rifle brass, this is one of the more useful collets in the lineup to keep on hand. RCBS publishes a full collet chart, so it is worth a quick cross-check against your exact cartridge before you order.
Built for the RCBS Trim Pro and Trim Pro-2
This collet is made for the RCBS Rotary Case Trimmer (Trim Pro) and the Rotary Case Trimmer-2 (Trim Pro-2). It drops in with a quick-release setup, so switching between collet sizes as you move from one caliber to the next takes seconds instead of fumbling with tools. The pilot and the trimmer body are sold separately, so this is the piece you grab when you are adding caliber coverage or replacing a worn collet.
Machined steel construction means it holds up to the grind of trimming hundreds of cases without losing its grip. It is a small part that quietly does a lot of the work, and getting the right one for your brass is what keeps every trimmed case measuring the same.
Key Specifications
- Manufacturer: RCBS
- Model: Case Trimmer Collet #3
- Manufacturer Part Number: 9373
- UPC: 076683093738
- Collet Size: #3
- Material: Machined steel
- Compatibility: RCBS Rotary Case Trimmer (Trim Pro) and Rotary Case Trimmer-2 (Trim Pro-2)
- Function: Secures case head for trimming to length
- Country of Origin: USA
- Shipping Weight: 0.0813 lbs
What’s Included
- RCBS Case Trimmer Collet #3 (one collet)
Frequently Asked Questions
What calibers does the RCBS Case Trimmer Collet #3 fit?
The #3 collet covers a wide spread of pistol and smaller rifle cases, including 22 Bench Rest, 22 PPC, 6mm PPC, 30 M1 Carbine, 30-40 Krag, 7.62×39, 357 Magnum, 357 Sig, 38 Special, 40 S&W, 405 Winchester, and 10mm Auto. Because collet sizing is based on case head diameter, check your exact cartridge against the RCBS collet chart before ordering to be sure the #3 is the right one.
Will this collet work with my RCBS trimmer?
It is made for the RCBS Rotary Case Trimmer (Trim Pro) and the Rotary Case Trimmer-2 (Trim Pro-2). It is not the MatchMaster collet, which is a separate part with different diameter steps, so make sure your trimmer is a Trim Pro or Trim Pro-2 before buying.
Do I need a pilot too, or does this come with everything?
The collet is sold on its own. You will also need the correct pilot for your bullet diameter and the trimmer body itself, which are sold separately, so plan on matching both the collet and pilot to the caliber you are trimming.
Why does the collet matter for accurate trimming?
The collet holds the case head square and tight so the cutter references the same spot on every case. When the brass is held straight, the trimmer stops following any runout in the case, and your trimmed lengths stay consistent from one piece to the next.



Reviews
There are no reviews yet.