Description
If you run an RCBS case trimmer and you've been fighting to hold certain cases square, the #2 collet is the piece that quietly fixes that. It clamps your brass concentrically the way a draw collet grabs stock on a lathe, so the case sits dead center while the cutter does its work. That squared-up hold is what gives you uniform trim-to-length across a whole batch, which matters when you're chasing consistent neck tension and clean case prep.
The #2 is the collet that covers a big chunk of the small-rimmed and straight-wall lineup. It handles cartridges in the range of .22 Hornet, .25-20 Winchester, .30 Luger, 9mm Luger, .38 Super, .32-40 WCF, .38-55 Winchester, .41 Magnum, .44 Magnum, and .44 Special, among others in that family. If you load a mix of older lever rounds and common pistol brass, this one tends to earn its keep fast. RCBS keeps a collet chart handy, and it's worth a quick look to confirm your exact case falls in the #2's window before you order.
How the RCBS Collet #2 Fits Your Setup
This collet is made for the RCBS Rotary Case Trimmer and the Rotary Case Trimmer-2. It drops into your existing trimmer head and takes over the job of holding the case, so there's no fiddling with shell holders to keep brass from spinning or sitting crooked. Steel construction means it holds its grip over a lot of cycles instead of wearing loose.
Why Reloaders Keep the #2 Collet on the Bench
Case trimming is one of those steps where small inconsistencies add up, and the right collet takes the guesswork out of it. Having the correct size on hand means you're not forcing an oddball case into the wrong hold and getting uneven mouths. For folks loading across several calibers, keeping a #2 next to your other collets rounds out the setup and keeps the whole trimming workflow moving smoothly.
Key Specifications
- Manufacturer: RCBS
- Model: Case Trimmer Collet #2
- Manufacturer Part Number: 9372
- UPC: 076683093721
- Type: Rotary case trimmer collet
- Material: Steel
- Compatibility: RCBS Rotary Case Trimmer and Rotary Case Trimmer-2
- Caliber Range: .22 Hornet through .38-55 WCF and related cartridges
- Quantity: 1 collet
- Country of Origin: USA
What’s Included
- One RCBS Rotary Case Trimmer Collet #2 (9372)
Frequently Asked Questions
What trimmers does the RCBS Case Trimmer Collet #2 work with?
The #2 collet is designed for the RCBS Rotary Case Trimmer and the Rotary Case Trimmer-2. It fits into your existing trimmer head and takes over holding the case. It is not interchangeable with trimmers from other brands.
Which calibers does the #2 collet hold?
The #2 covers a wide spread including .22 Hornet, .25-20 Winchester, .30 Luger, 9mm Luger, .38 Super, .32-40 WCF, .38-55 Winchester, .41 Magnum, .44 Magnum, and .44 Special, plus others in that family. Because the ranges overlap between collet sizes, it is worth checking the RCBS collet chart to confirm your exact cartridge falls in the #2 window before ordering.
How does the RCBS collet actually hold the case?
It works like a draw collet on a lathe, clamping the case concentrically so it sits dead center while the cutter trims the mouth. That squared-up hold is what delivers consistent trim-to-length across a batch. It keeps brass from spinning or sitting crooked during the cut.
Is this collet sold by itself?
Yes, the #2 collet is sold individually and does not include the trimmer, pilots, or cutter. You add it to an RCBS trimmer you already own. Many reloaders keep several collet sizes on the bench to cover their full range of calibers.



Reviews
There are no reviews yet.