Description
If you're loading .44 Magnum or .44 Special, the RCBS Shell Holder #18 is the little piece of steel that makes the whole job work. It grips the case head and snaps into the ram of your press, holding the case square and centered so it feeds straight into the die. A sloppy or ill-fitting shell holder is where headspace and sizing headaches start, and this one is built to avoid exactly that.
RCBS machines its single stage shell holders from hardened steel to some of the tightest tolerances in the business. The #18 is sized specifically to fit the .44 Mag and .44 Special case head, capturing 0.125 inch of the rim for proper SAAMI headspacing. That consistent grip is what keeps your sizing and seating uniform round after round, which matters whether you're working up a plinking load for the range or something stouter for the woods.
Where the RCBS #18 Shell Holder Fits In
This holder drops into single stage and turret presses and is compatible with virtually all major brands of reloading presses, so it plays nice with whatever bench setup you're running. The slot in the ram and the groove on the shell holder follow the standard setup RCBS and most presses share, so swapping it in and out between calibers takes seconds. Made in the USA with a clean silver finish, it's the kind of simple tool that just works and keeps working.
Picking the Right Shell Holder #18
Shell holders are matched to case head diameter, not just caliber name, which is why the #18 covers both .44 Magnum and .44 S&W Special. The two cartridges share the same rim, so one holder does double duty. If you load both rounds, this single piece keeps your bench tidy and your case alignment spot on across the pair.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9218
- UPC: 076683092182
- Shell Holder Size: #18
- Caliber/Gauge: .44 Magnum / .44 S&W Special
- Material: Hardened Steel
- Finish: Silver
- Case Head Capture: 0.125 inch for SAAMI headspacing
- Press Compatibility: Single Stage and Turret Presses
- Product Type: Shell Holder
- Quantity: 1
- Country of Origin: USA
What’s Included
- RCBS Shell Holder #18 (.44 Mag / .44 Special)
Frequently Asked Questions
What calibers does the RCBS Shell Holder #18 fit?
The #18 is sized for the .44 Magnum and .44 S&W Special case head. Both cartridges share the same rim diameter, so this one holder covers both. If you load either or both of those rounds, this is the correct shell holder.
Will the RCBS #18 shell holder work in my press?
Yes, it's designed for single stage and turret presses and is compatible with virtually all major brands of reloading presses. It uses the standard shell holder groove that most presses share, so it drops right into the ram. Swapping it in and out between calibers only takes a few seconds.
Why does the shell holder capture 0.125 inch of the case head?
That specific depth is what gives you proper SAAMI headspacing when the case is seated in the holder. It keeps the case gripped square and centered so it feeds straight into the die. Consistent capture like this is what keeps your sizing and seating uniform from one round to the next.
What is the RCBS Shell Holder #18 made of?
It's machined from hardened steel with a silver finish and made in the USA. RCBS holds these to tight tolerances for a secure, repeatable grip on the case. The hardened steel means it holds up to years of regular bench use.




Reviews
There are no reviews yet.